ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
Top Posters(30 Days)
sparky 5
Recent Posts
Holiday Wishes to all!!
by HotLine1. 12/15/17 07:20 PM
Dimmable LED 2x4 lay in fixtures
by HotLine1. 12/15/17 07:15 PM
2017 NEC Changes
by HotLine1. 12/15/17 07:06 PM
Casino Wiring methods
by HotLine1. 12/09/17 10:44 AM
Ground wire Size to water Line.
by HotLine1. 12/05/17 12:11 PM
New in the Gallery:
Gallery Test
Popular Topics(Views)
243,084 Are you busy
179,524 Re: Forum
170,439 Need opinion
Who's Online Now
0 registered members (), 7 guests, and 11 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate This Thread
Page 1 of 2 1 2
#122966 - 02/12/06 05:46 PM Fuse Box Violations  
Admin  Offline

Administrator
Member
Joined: Oct 2000
Posts: 3,460
NY, USA
Quote
Count up the violations/ hazards in this one. [Linked Image] From a home built in the mid fifties.

trublu832
[Linked Image]


Tools for Electricians:

#122967 - 02/12/06 08:39 PM Re: Fuse Box Violations  
jfwayer  Offline
Member
Joined: May 2005
Posts: 30
Fairmont, WV, USA
Assuming this is the service panel:
0) 110.12(C) broken strand in service cable grounded wire.
1) 230.70 No means to disconnect the two circuits (using wh, blk, grn cables) connected directly to service cable.
2) 230.82 Assume the two wh, blk, grn cables do not fall under this allowable connection before service disconnect.
3) 110.14(A) Assume the terminals the two wh, blk, grn cables connect to are not identified for more than one conductor.
4) 200.7(C)(1) requires the white wires connected to the red service wire to be reidentified with a color other than white, gray, or green.
5) 110.14(A) assume the lower right screw on the neutral bar is not identified for more than 1 conductor.
6) 312.5(A) grounding wire enters a hole that is not adequately closed
7) 312.5(C) the two wh, blk, grn cables are not secured to the cabinet
8) 240.51(B) there is evidence of overfusing, one or more 14 AWG or 12 AWG wires appear to be "protected" by a 30A fuse.
9) 240.54 requires type S fuses under these circumstances.
10) 250.24(B) it is unclear whether or not the neutral bar is bounded to the cabinet


JFW

#122968 - 02/12/06 09:33 PM Re: Fuse Box Violations  
electure  Offline


Member
Joined: Dec 2000
Posts: 4,262
Fullerton, CA USA
It seems to me like applying a Code that's 50 years newer than the installation is not that much different than applying a Code that's 50 years older than the installation.

Does it meet 1905 Code?


#122969 - 02/12/06 10:07 PM Re: Fuse Box Violations  
jfwayer  Offline
Member
Joined: May 2005
Posts: 30
Fairmont, WV, USA
It seems to me that the plastic sheathed cable is not 50 years old and the source of most of the violations. (Old romex would have reduced ground wire sizes.)


JFW

#122970 - 02/12/06 11:04 PM Re: Fuse Box Violations  
mxslick  Offline
Member
Joined: Oct 2004
Posts: 803
Atomic City, ID USA
Did you all notice that the wires entering on the left appear to be SO CABLE!!

Not to mention that the white is lugged to the main AHEAD of the pullout fuses!!

Plus evidence of overheating on the lower-right hand pull out block's load connection.

Did anyone pull the meter out on this mess?!


Stupid should be painful.

#122971 - 02/13/06 07:20 AM Re: Fuse Box Violations  
pauluk  Offline
Member
Joined: Aug 2001
Posts: 7,520
Norfolk, England
Quote
Did you all notice that the wires entering on the left appear to be SO CABLE!!


And they appear to enter the lower left corner of the panel without any sort of bushing or other protection.

I often find systems here in which the original 1950s/60s insttallation was just fine, but the extensions and modifications to it in more recent times are the problem.

It looks to me as though this might be a similar sort of situation.


#122972 - 02/13/06 01:28 PM Re: Fuse Box Violations  
John Crighton  Offline
Member
Joined: May 2005
Posts: 177
Southern California
There don't appear to be any EGCs at all. Was that typical for the Romex of the period, or were they cut off and thrown away?

How on Earth did some hack install those SOs on the main lugs without getting lit up???


#122973 - 02/13/06 02:30 PM Re: Fuse Box Violations  
mamills  Offline
Member
Joined: Nov 2001
Posts: 745
Wharton, Texas, USA
It's amazing what those hacks can get away with...for a while. Just slip on a pair of ordinary gloves, grab a screwdriver with a real plastic grip, and take on the world [Linked Image]. The insulation on those main conductors doesn't look too great. Might be some heating going on there also.

Trublu832: Can you tell us where those two SO's go?

Mike (mamills)


#122974 - 02/13/06 03:44 PM Re: Fuse Box Violations  
RODALCO  Offline
Member
Joined: Dec 2005
Posts: 854
Titirangi, Akld, New Zealand
The black and white wire looped into the left top switch / fuse carries has no fuse protection on it by the looks of it.

Also at the right no bushing used for the bare earth wire,

on the earth / neutral bar the wires are not terminated in an eye shaped way under the screws, but straight.

Typically you see these types of cables in older NZ installations from the 50's too.

Some cables are in very good condtions while other cables have very brittle insulation.


The product of rotation, excitation and flux produces electricty.

#122975 - 02/13/06 04:16 PM Re: Fuse Box Violations  
techie  Offline
Member
Joined: May 2005
Posts: 246
palo alto, ca usa
Quote
Did you all notice that the wires entering on the left appear to be SO CABLE!!



They look like solid conductors to me, which
means that it's not SO cable.

Look at how the wire holds its shape, and at the terminations on both the fuse block and the neutral bus.


Page 1 of 2 1 2

Member Spotlight
akmaster
akmaster
alaska
Posts: 70
Joined: June 2012
Show All Member Profiles 
Featured:

2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Shout Box
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.016s Queries: 15 (0.003s) Memory: 0.8193 MB (Peak: 0.9933 MB) Zlib enabled. Server Time: 2017-12-17 07:51:47 UTC