ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Canada for the win
by grich - 12/08/22 06:49 PM
Tiny Homes and the NEC
by gfretwell - 12/06/22 01:43 AM
EMC Glands on Motors
by Trumpy - 12/01/22 06:12 AM
Ground Rods: Installation and Hook-Up
by Trumpy - 12/01/22 05:54 AM
Happy Thanksgiving all!
by gfretwell - 11/30/22 05:55 PM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
1 members (Scott35), 9 guests, and 18 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jul 2002
Posts: 8,432
Likes: 3
Trumpy Offline OP
Member
Submitted for Renosteinke:
Quote
A customer of mine added a propane dispensing facility near his switchgear. The two are 25 ft. apart, as the shrapnel flies.

How would you decide if 25 ft was plenty of room, barely enough, or not enough? What sources would you consult?

[Linked Image]
Bigger pic

Thanks John!. [Linked Image]

Joined: Feb 2005
Posts: 219
S
Member
John
Around here any source of ignition needs to be 10'-00" away from the tank. (for propane)

Rob

How close is the main gear to Utility Xformer, it looks like a really tight space between them.

[This message has been edited by sierra electrician (edited 07-11-2005).]

Joined: Jan 2005
Posts: 5,362
Likes: 1
Cat Servant
Member
PoCo transformer is about six feet from the switchgear. It was installed for this gear, and serves no other.

Joined: Jul 2002
Posts: 680
W
Member
Wouldn't the seperation distance be up to whoever dictates LPG codes?? Doesn't seem like an issue for an electrician. Your work will satisfy code, why should you have to worry about where someone else set the tank??. In Maine, I'd start with the Maine Oil Dealers assoc. or the company who set the tank. Also in Maine one must be licensed to set propane tanks

Joined: Feb 2005
Posts: 219
S
Member
Walrus
The separation is dictated by Fire Code....The NEC is dictated by Fire Code.

I was installing power to Propane Pump Station for the pump and a Night Light at a local Mini-Mart and could not find the code in the NEC book. I found it in the local County Code. Its been so long since I've seen it I cant recall the the artilce, but itwas "cut and paste" from Fire Code. There is a 10'-00" envelope that follows the contour of the tank, anything inside or passes through that area is Class 1 Div 1.

Rob


Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *
2023 National Electrical Code (NEC)
2023 NEC Now Available!
 
* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
pcsailor
pcsailor
Minneapolis, MN, USA
Posts: 21
Joined: September 2019
Top Posters(30 Days)
Trumpy 6
NORCAL 3
Popular Topics(Views)
300,646 Are you busy
230,343 Re: Forum
215,102 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5