ECN Forum Forums Photo Discussion Forums Photos for General Discussion Wrong Cover - Is this a Violation?

I see this from time to time and it bothers me a bit, but is it a Violation?

Bill

Appears to be a metal box cover on a PVC box.

Also, the hinge on the cover operates in the wrong direction.

Not an "in-use" cover?

The manufacturers instructions (not that anybody bothers to read them) more than likely states the orientation of this cover.

(PS: It's probably plactic, as the box)

John

Why does it matter what direction the spring cover opens?

Must it open so that the ground pin faces the hinge or the two current-carrying pins face the hinge?

An in-use bubble is much neater-looking also.

TG,

This is not a new installation, or subject to latest codes anyway.

John,

I'm referring to the orientation of the Box and Cover. I suspect it is as weatherproof in this position as any other when it is closed and that may be all that matters. Does anyone Redtag for this?

(ps it is a metal cover)

Bill

Sven,

If the cover is oriented in the intended manner it does give some protection from the elements when it is in use. But I think it's only requirement applied to the protection it gave when it was closed.

Bill

I have a silly question; Can an in-use cover (which I have seen installed on many vertically-mounted devices) also be used on horizontal as well, or are there in-use covers specifically made for this?

...throw pebbles, please...not big rocks

Mike (mamills)

Mike,

No pebbles either,
Sure they do, here's one style made by Carlon:



Take a look here for more on them.
Product Catalog >> Electrical >> Weatherproof >> In Use Covers.

Bill

[This message has been edited by Bill Addiss (edited 05-05-2003).]

Hi Bill: Thanks for the info. Sure looks like a much nicer install, as well as being able to shed water better.

Mike (mamills)