ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Do we need grounding?
by tortuga - 03/18/24 08:39 PM
240V only in a home and NEC?
by tortuga - 03/18/24 04:29 PM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
Test Post
by sabrown - 03/06/24 05:29 PM
Solar PV Wiring Errors
by renosteinke - 03/02/24 09:12 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 92 guests, and 13 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Joined: May 2001
Posts: 552
T
Member
The gfci for the pool light is via a receptacle at the pool equipment.No gfci protection for the pump.The bare grounds are connected to the neutral bar.The blue is actually phasing tape that it appears someone used to identify the white as a phase conductor.

How about the service entrance ?conductors.The rigid nipple from the meter can is about 2 inches too short.


Donnie
Joined: Feb 2001
Posts: 32
G
Member
It looks sort of like a Home Depot display !!

Joined: Jan 2002
Posts: 209
S
Member
The bare wires are pretty scary, But what is that black rectangle in the bottom of the panel. It looks like a radio shack transformer. Could it possibly be for low voltage wiring? If so how are the wires attached to the plug? It looks like there are two wires that are electrical taped onto the plugs.

Joined: May 2001
Posts: 552
T
Member
scotts,
That's a surge suppressor laying in the bottom of the panel.It's goes to 2 single pole 20 amp breakers.Flush mount panel,guess the installer was at a loss as to where to install it.


Donnie
Page 2 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5