ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
Unusual Well Pump Switch Failure
by sabrown - 10/28/20 04:31 PM
Look at this mess...
by InspectorE - 10/27/20 09:09 PM
New tool
by gfretwell - 10/24/20 11:09 AM
Where is Everyone?
by Bill Addiss - 10/17/20 07:04 PM
New in the Gallery:
Facebook follies, bad wiring
FPE in Germany pt.2
Who's Online Now
0 registered members (), 21 guests, and 17 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Sign Feed #112269 05/15/01 01:53 AM
Joined: Oct 2000
Posts: 3,631
Admin Offline OP
Administrator
Member
Quote
<font size="2">The LB in the first pic feeds the sign in the second pic

I removed the logo on the sign through "puter magic".</font>


<font size="2">-Virgil
</font>


<img border="0" src="https://www.electrical-contractor.net/Violations/Submissions/sign2.jpg" width="478" height="464">


<img border="0" src="https://www.electrical-contractor.net/Violations/Submissions/sign1.jpg" width="478" height="464">



[This message has been edited by Webmaster (edited 05-15-2001).]

Tools for Electricians:
Re: Sign Feed #112270 05/15/01 02:29 AM
A
Anonymous
Unregistered
And what did you remove from the LB?


This must be a new installation... the vines haven't grown over it yet.

Re: Sign Feed #112271 05/15/01 10:46 AM
Joined: Nov 2000
Posts: 2,236
sparky66wv Offline
Member
Swear to God I didn't doctor the first pic...
Only wanted to protect the interest of companies like Chev...OOOPS! Heh heh heh, pardon my slip is showing...


-Virgil
Residential/Commercial Inspector
5 Star Inspections
Member IAEI
Re: Sign Feed #112272 05/15/01 04:12 PM
A
Anonymous
Unregistered
The first pic has a suspicious gray area on the LB.

>Heh heh heh, pardon my slip is showing...
As if we could have never guessed from the shape of the sign...

Re: Sign Feed #112273 05/15/01 04:30 PM
Joined: Oct 2000
Posts: 5,389
S
sparky Offline
Member
do you think it was originaly installed in the hole, and pulled out?

Re: Sign Feed #112274 05/16/01 01:30 AM
Joined: Nov 2000
Posts: 2,236
sparky66wv Offline
Member
The markings on the LB is writing of some sort (price?) No, the first one is an upside-down "P"? Almost looks like the word "PET" but that makes no sense. My original pic has a tad better resolution, I think Bill's JPG compressor might be set a tad high... I'll be stopping here for gas tomorrow, so I'll get a closer look.

It's rigid pipe, so it hasn't been moved, it's nicely plumb and square, and also there is nothing to fasten to on the inside, that I could see. I believe the square hole in the sign post should have been the hand hole access, and the conduit should be fastened to the other side of the pipe, but the beam is in the way.

The sign of the competitor's across the street is well over 100' tall, requires two semi trucks to bring a crane tall enough to get a man-cage up just to change the bulbs. I can only imagine what that costs... [Linked Image]

The useless sign editing shows my bizarre sense of humor... [Linked Image]


[This message has been edited by sparky66wv (edited 05-16-2001).]


-Virgil
Residential/Commercial Inspector
5 Star Inspections
Member IAEI
Re: Sign Feed #112275 05/16/01 06:07 AM
Joined: Oct 2000
Posts: 5,389
S
sparky Offline
Member
one February i was in a bucket up as high as it would go, the sign had large pieces that slid out of grove channels.

on sliding one out, it caught the wind and actually started to lift me out of the bucket.

i sure was glad i had the lanyard on!

[Linked Image]

Re: Sign Feed #112276 05/16/01 07:16 AM
Joined: Dec 2000
Posts: 4,283
electure Offline
Member
About 20 yrs ago, I worked for a co, (Manor, we pronounced it "manure") w/a sign maint dept. One of the guys was in a sign w/a bottom access door, boom extended all the way(c.90'). The boom retracted,leaving him stranded,& wouldn't go back up. The Fire Dept. showed up to get him down, but their boom wasn't quite long enough. He had to hang out of the sign, & drop about 8'to them When he showed @ the shop,wide eyed & sorely bruised from the F-men grabbing him,the boss just asked if he had closed the access door.(that boss ended up being my employee 18 yrs. later...for a very short time)

Re: Sign Feed #112277 05/16/01 12:13 PM
Joined: Nov 2000
Posts: 2,236
sparky66wv Offline
Member
Off topic:

I forgot to release my lanyard once, I was on a boom lift, was going down after measuring for some pipe, Got jerked up from the cage with my foot just barely off the safety switch/pedal. It took me about a half hour to get out of that mess! I managed to drop almost every tool in my belt onto the switch enough that my foot could maneuver a screwdriver onto it. Talk about embarrassed! No one was wise to it though!


-Virgil
Residential/Commercial Inspector
5 Star Inspections
Member IAEI
Re: Sign Feed #112278 05/17/01 12:26 AM
Joined: Nov 2000
Posts: 2,236
sparky66wv Offline
Member
The writing is "P25" apparently circuit 25 on the power panel.


-Virgil
Residential/Commercial Inspector
5 Star Inspections
Member IAEI
Page 1 of 2 1 2

Featured:

2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
watersparkfalls
watersparkfalls
Washington...Not DC
Posts: 236
Joined: March 2005
Show All Member Profiles 
Top Posters(30 Days)
Popular Topics(Views)
271,060 Are you busy
205,042 Re: Forum
193,167 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3