I am in Westchester County NY, suburb of NYC.
1) 200 Amp residentail upgrade. SE Cable(25'), 20-30 existing ckts, surface mt.
$1500 I am doing one of these tomorrow for $1800 because house has knob and tube wiring, 45 feet of SEU, using copper, and square d panel to replace existing, normally I would use a murray or ge contractor kit for less$$.
2) Same as above, except flush mount in drywall with average cutting/patching.
$1800-$1900
3)Ceiling fan with attic access, and fed from switchbox with 14-3.
$300 fan included
4) Same as above with no access above
(cutting & drilling required)
$400 just put two industrial types in a laundromat for $600 had to bend EMT
5)Minimum billing rate-first hour, each additional hour.
$45-$55 per hour depends on nature of work residential
$65 per hour commercial
May sound high to you guys, but the cost of doing business is high here. A typical job costs $20-$40 to file, $40-$100 for underwriters inspection, special paralell groove connectors for Con Ed are $14 each, Parking ticket $55 , lunch $8-$12, parking garage to avoid ticket $28. Bribe $50
