I have a Hydro-Air HA 430 single phase 1hp motor and would like to change it to 2 speed,
is there a way to run it at a slower speed as i need to run it as a circulation pump but when i flick a switch it comes on to full power.
How do i go about doing this?
Specs
Motor
Ip-X5 220/240v 50-hz AC-1
Amps 5.2 Watts 1000
H(max) 16 m3/h 23
Capacitor
WB40200 MK SH
20uf +- 5% PO
AC400v B
AC450v C
40/085/21
50=60Hz
Any advice appreciated.
Pegitt
