ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals

Page 1 of 2 1 2 >
Topic Options
Rate This Topic
#81441 - 08/19/02 05:54 AM What NEC edition are you using
Joe Tedesco Offline
Member
Registered: 10/07/00
Posts: 2749
Loc: Boston, Massachusetts USA
My state uses the 2002 NEC edition.

[This message has been edited by Joe Tedesco (edited 08-19-2002).]
_________________________
Joe Tedesco, NEC Consultant
Top
2017 / 2014 NEC & Related Books and Study Guides
#81442 - 08/19/02 01:16 PM Re: What NEC edition are you using
Joe Tedesco Offline
Member
Registered: 10/07/00
Posts: 2749
Loc: Boston, Massachusetts USA
Answers given here should be supported by code edition and sections to avoid confusion.
_________________________
Joe Tedesco, NEC Consultant
Top
#81443 - 08/19/02 01:30 PM Re: What NEC edition are you using
HotLine1 Offline


Member
Registered: 04/03/02
Posts: 6776
Loc: Brick, NJ USA
Joe:
Here in NJ the stste is still using 1999 NEC as the electrical code section of the NJUCC
(New Jersey Uniform Cobstruction Code)
Someday, they will adopt the 2002.
HotLine1
John
_________________________
John
Top
#81444 - 08/19/02 02:04 PM Re: What NEC edition are you using
sparky Offline
Member
Registered: 10/18/00
Posts: 5303
Vermont is still 99' , the borad reviews & revises in this month for the 02'
Top
#81445 - 08/19/02 02:21 PM Re: What NEC edition are you using
dana1028 Offline
Member
Registered: 01/09/02
Posts: 163
Loc: San Carlos, CA
CA - 1996! ...sure is difficult keeping up with these forum Q&As...got to the point I was pretty comfortable with the '99 and now ya'all quoting the 2002...by the time we finally start using the '99 that AFCI issue will be resolved!
Top
#81446 - 08/19/02 07:03 PM Re: What NEC edition are you using
sparky66wv Offline
Member
Registered: 11/17/00
Posts: 2232
Loc: West Virginia
2002 NEC in West Virginia, as far as I know it was adopted in full last spring.

Have to go with CABO too as far as working clearances from service equipment to water heaters (5 ft min) and locations of smoke detectors.

The only enforcement is with Services for Allegheny Power and in the city (I use that word lightly) of Lewisburg for the area I cover.

[This message has been edited by sparky66wv (edited 08-19-2002).]
_________________________
-Virgil
Residential/Commercial Inspector
5 Star Inspections
Member IAEI
Top
#81447 - 08/19/02 08:02 PM Re: What NEC edition are you using
dlabrenz Offline
Member
Registered: 09/04/01
Posts: 25
Loc: Muskegon, MI
Michigan is using the 1999 NEC with amendments as part of the Michigan Electrical Code We also use the 2000 Int'l Res. Code for 1 and 2 family dwellings.

Don
Top
#81448 - 08/19/02 08:23 PM Re: What NEC edition are you using
arseegee Offline
Member
Registered: 01/28/02
Posts: 324
Loc: Statesboro, GA USA
City 2002, county 1999. Both with Georgia amendments.

[This message has been edited by arseegee (edited 08-19-2002).]
Top
#81449 - 08/20/02 03:49 AM Re: What NEC edition are you using
sparky Offline
Member
Registered: 10/18/00
Posts: 5303
ain't worth a hoot without some enforcement.......
Top
#81450 - 08/20/02 04:35 AM Re: What NEC edition are you using
George Corron Offline
Member
Registered: 05/16/01
Posts: 717
Loc: Lorton, Va USA
VA is on the 1996 code for commercial, and the 93 code for residential. That is due to change soon I understand.
Top
Page 1 of 2 1 2 >

Member Spotlight
Member Since: 07/05/02
Posts: 8211
New in the Gallery:
SE cable question
Featured:

2017 NEC and Related
2017 NEC
Now Available!

Shout Box


Who's Online
1 registered (gfretwell), 90 Guests and 11 Spiders online.
Key: Admin, Global Mod, Mod
 
New in the Gallery:
SE cable question
 
Top Posters (30 Days)
Admin 49
HotLine1 43
gfretwell 18
Ruben Rocha 12
Trumpy 9
 
Newest Members
Freecrowder, clee512, Jdscott2005, FAIZAN, Regitest2

ECN Electrical Forums - sponsored by Electrical Contractor Network - Electrical and Code Related Discussion for Electrical Contractors, Electricians, Inspectors, Instructors, Engineers and other related Professionals