ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by gfretwell - 03/28/24 12:43 AM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (gfretwell), 32 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#59606 12/08/05 05:46 PM
Joined: Nov 2005
Posts: 8
K
Junior Member
Hi all!

I started as an electrical apprentice about 10 months ago here in Ireland and I just wanted to find out about electrical work in other countries and elsewhere in Ireland.

Since I've stared I've been doing all sorts work and I was wondering do other electricians do the same kind of work.

I've done a good range of electrical work; industrial, domestic and agricultural; all aspects - Electrical, Tv, phone, computer, alarms. I've done a good bit of plumbing work, refrigeration, air conditioning and cold/freezer room work, repairs on all sorts of industrial machines, repairs on domestic appliances. I work on my own quite a lot especially recently, probably 70% over the last two months I’ve been doing a very large house (1st and 2nd fix) on my own including the board and connections to the main isolator. A few months back I was on my own for a good while in a large butchers shop to 1st and 2nd fix also. Over the last few days I’ve been working with my boss’ son, teaching him the little I know about the job. I’m glad my boss trusts me to work on my own and make decisions about jobs but I don’t think I’m supposed to be on my own at all for more reasons than I could list.

Basically I was just wondering do other electricians do as broad a range of work or do they usually stick to a couple of things. I’m not complaining about my work, I’m glad I get to learn about such a broad range of areas. Plus I’d like to hear any tips or advice you guys could give me. Great site by the way!

Thanks in advance for your answers.

Ross

#59607 12/08/05 06:05 PM
Joined: Jul 2002
Posts: 8,443
Likes: 3
Member
Gidday there Ross,
Welcome to ECN!. [Linked Image]
djk would be the man to see on matters Ireland, he's there he should know.

#59608 12/08/05 06:22 PM
Joined: Nov 2005
Posts: 8
K
Junior Member
I'm interested to know what way things are done in other parts. I haven't been on block release yet. I'm not sure what way apprenticeships work anywhere else but here we do a certain amount of time with our employer and then we go to "college" and do theory and practical work there. For example I'm in Phase 1 where I work with my employer, for Phase 2 I go to college. This is repeated for around 4years in total, then you are qualified. Most aprenticeships in Ireland are done through a body called Fás who will pay you while you are off the job with them and look after all the exams etc.

#59609 12/08/05 10:20 PM
Joined: Jan 2005
Posts: 109
L
Member
Enjoyed the diversity of the electrical trade that is why I do this. It sounds like you are going over the scope of an electrical apprentice but if you like your job keep it; if not find other employment. I do not know how it is where you are but as far as I am concerned you cannot have to much training. Learning about different trades helps separate the craftsman from the hacks. Good luck and above all enjoy what you do. Rod

#59610 12/09/05 12:54 AM
Joined: Oct 2005
Posts: 141
L
Member
I work in a service department so I never know what Im going to run into, keeps the job interesting. We would never allow a 10 month apprentice to be on the job alone unless it was for a short time like a supply house run ETC.

#59611 12/09/05 02:36 AM
Joined: Jul 2002
Posts: 8,443
Likes: 3
Member
I work for a Lines Company here in New Zealand.
I've served 2 apprenticeships, 1 as a Line Mechanic (Lineman) and the other as an Electrician.
No matter where you are, one thing that I would agree with, is the fact that you can't have enough training, no matter what trade you are in.
I never picked up PLC stuff until I finished my time as an Electrician.
Ross, It depends upon what you want to do, mate.

#59612 12/09/05 03:37 AM
Joined: May 2003
Posts: 2,876
E
e57 Offline
Member
"I’m glad my boss trusts me to work on my own and make decisions about jobs but I don’t think I’m supposed to be on my own at all for more reasons than I could list."

Hmmm... Are you thinking it is more JOB, than OJT? You sound like, and fortunately may be the cautious type? And wise if you are... Under a year in the trade many would not leave you alone very much. Unless you are super fantastic at understanding and following directions, and all of your work is checked before energizing. And not working live I assume.

As for other countries, I know a few guys that I used to work with that have traveled the world doing electrical work. (Most of them also Irish.) There's a whole world out there, and a lot too learn, well past your apprenticeship.

I have been at this about sixteen years and learn new things all the time. I started as an equipment repair specialist for industrial motor controls in the military, but have done airfield lighting, ship to shore power, some low volt line work. Then resteraunts, showrooms, corperate events, phones, networking, and high-end homes with full automation. I have done a little, and a lot of most, and there's always something else to learn.

Dare, I say it, the only way to get stuck doing the same 'ol, same ol, is to have the same 'ol employer for the whole time. I think it is good to move around every few years, (especialy early on) and be selective about who you work for, and what you can learn, and gain from them in the proccess. Some apprenticeships actually require it.


Mark Heller
"Well - I oughta....." -Jackie Gleason

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5