ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals

Topic Options
Rate This Topic
#174411 - 02/04/08 08:53 AM Job options
venture Offline
Member
Registered: 01/08/06
Posts: 38
Loc: San Diego Ca USA
I have a bad back after being in a car accident. I have been an electrician for 30+ yrs. I need ideas on what to do to earn a living now. I have made troubleshooting my specialty over the years and have run jobs/crews. Mostly Indus rial and commercial till the last few years residential service work thrown in. I will have to start a new career from scratch at 50yrs. Any ideas for a old broke down electrician? Any ideas welcome. Rod
Top
Work Gear for Electricians and the Trades
#174414 - 02/04/08 10:38 AM Re: Job options [Re: venture]
Surfinsparky Offline
Member
Registered: 07/29/05
Posts: 73
Loc: merritt island fl usa
Perhaps you could get into estimating. How about dispatcher or sales or something along those lines. If you have been an Electrician for 30 years surely there is something you can do. How about project manager?


Edited by electure (02/04/08 07:41 PM)
Edit Reason: Edited for content
Top
#174418 - 02/04/08 12:20 PM Re: Job options [Re: Surfinsparky]
HotLine1 Offline


Member
Registered: 04/03/02
Posts: 6778
Loc: Brick, NJ USA

Venture:

Think about a supply house inside or outside sales??
_________________________
John
Top
#174419 - 02/04/08 12:28 PM Re: Job options [Re: Surfinsparky]
petey_c Offline
Member
Registered: 01/30/05
Posts: 62
Loc: Miller Place, NY USA
Venture, Sorry to hear about the bad back. Have you thought about teaching in a trade school (if the above options don't pan out)? Doesn't Ca. have some sort of vocational re-training available? Best of luck.
Top
#174421 - 02/04/08 12:41 PM Re: Job options [Re: HotLine1]
sparkync Offline
Member
Registered: 10/17/02
Posts: 812
Loc: NC
Venture, I'm sort of in the same position it seems sometimes. Been in the trade for 37 years, and had my license since 1981. It's getting kind of hard to crawl under houses now. I've been thinking on the same lines. I would like to get into something along the lines of "consultant" smile but that don't seem to be a profitable idea, since the big stores have already got books out for the DIY's, or at least a desk job using my knowledge now instead of "physical labor" so much. If you come up with any ideas, I would like to know too. Hope you the best. The younger guys will know how it feels if they stay in the trade long enough smile Steve...
Top
#174449 - 02/05/08 04:20 AM Re: Job options [Re: venture]
renosteinke Offline
Cat Servant
Member
Registered: 01/22/05
Posts: 5316
Loc: Blue Collar Country
Sorry to hear about the accident. Yet, I cannot help but feel that you are only facing what we all face ... just a bit sooner than most.

I suppose that the trouble starts the day you get your journeyman card ... "Finished at last!" is a common thought. Yet, in reality, the time for learning has just begun.

So ... what to do AFTER you've 'made your Sparky bones?' That's the real question.

Let's be honest .... we get away from the grunt work the minute we start training the next tier of helpers. By the time we start our own contracting business, the vast majority of the physical stuff is done by others.

Let's look at what a contractor must do, apart from actually pulling wires:
-Runs all over town, getting permits, meeting with customers, ironing out details with the architect, etc.;
-Has to find new work;
-Has to prepare payroll, pay the insurances, keep the books in order;
-Meets with inspectors;
-Does job walk-throughs;
-Scheduling;
-Obtains needed materials and equipment.

Let's face it ... here we have the seeds of many different jobs. I suppose we need to spend our "journeyman" years getting the formal coursework, etc., to quantify these skills. Then, we'll be better prepared to make the change when the time comes.

Naturally, larger contracting firms have a need for estimators, project managers, quotations, purchasing agents, etc.
Towns have need for inspectors ... and there is that whole 'home inspector' business (most of whom are pretty weak on electrical matters).
Maintenance departments need managers. So do larger property management operations.
Even the much-maligned architects and engineers need someone in their offices, checking the plans.

So ... to put it in mercenary terms .... all those folks you've been dealing with the past few years? You want their job!
Top
#174454 - 02/05/08 08:40 AM Re: Job options [Re: renosteinke]
JValdes Offline
Member
Registered: 06/03/07
Posts: 301
Loc: South Carolina
Rod,
I am in exactly the same situation. And same age group. I'm 51. I hurt my back in 2005 and haven't worked since. I am still on workers comp and cannot do anything even if I wanted to. That is why I am here so often. I have done some consulting work on the side with motors, controls and drives. I also come from an industrial situation, lastly working for a vendor the last 8 years as an outside sales rep. I still have my masters card and keep my contractors license up that I never use. I am currently working on a construction upgrade. Consulting only.

Please try to keep your spirits up. If you have some income from the injury this will be easier. Are you able to work? Do you want to work? If you answered no to either, try and get on SS if you are truly disabled. Then you can work some to keep busy, contribute and supplement your income. You worked hard all your life. It's time you take it easy and do what you want to do.
If you ever need someone to talk too let me know.
jvaldes@windstream.net


Edited by JValdes (02/05/08 08:46 AM)
Top
#174456 - 02/05/08 09:47 AM Re: Job options [Re: venture]
andyenglish Offline
Member
Registered: 01/05/08
Posts: 19
Loc: CANADA
Hi Rod,
Sorry to hear about your accident. I think that petey_c's suggestion of teaching is a good one. I'm a retired project manager and I teach at a local college. Mind you, I teach an evening class to adults, one night a week, but here in Ontario, all the electrical apprentices (all the trades for that matter) spend some of their apprenticeship in college. You could pass on some of that ol' broke down electrician's ideas and experience to the up and comers. You seem to have a lot of worthwhile knowledge to share. I'm sure it would be appreciated.
Cheers,
Andy
_________________________
It's always easier to get forgiveness than it is to get permission.
Top
#174457 - 02/05/08 09:49 AM Re: Job options [Re: venture]
Helectric Offline
Member
Registered: 01/07/05
Posts: 90
Loc: Brandon, SD
I see that you have some industrial experience. Does this include any PLC or controls experience. I have been contacted within just the last few months by a couple of industrial firms that are searching for a controls person. These jobs are essentially desk jobs and pay very well.
Top
#174462 - 02/05/08 11:54 AM Re: Job options [Re: Helectric]
venture Offline
Member
Registered: 01/08/06
Posts: 38
Loc: San Diego Ca USA
<I see that you have some industrial experience. Does this include any PLC or controls experience. I have been contacted within just the last few months by a couple of industrial firms that are searching for a controls person. These jobs are essentially desk jobs and pay very well. >

Yes I have done plc and controls. I had not thought of that as a stand alone job. Thanks for the tip.
Top

Member Spotlight
Member Since: 07/05/02
Posts: 8211
New in the Gallery:
SE cable question
Featured:

2017 NEC and Related
2017 NEC
Now Available!

Shout Box


Who's Online
0 registered (), 55 Guests and 10 Spiders online.
Key: Admin, Global Mod, Mod
 
New in the Gallery:
SE cable question
 
Top Posters (30 Days)
Admin 47
HotLine1 43
gfretwell 19
Ruben Rocha 12
Trumpy 9
 
Newest Members
Scotto, Freecrowder, clee512, Jdscott2005, FAIZAN

ECN Electrical Forums - sponsored by Electrical Contractor Network - Electrical and Code Related Discussion for Electrical Contractors, Electricians, Inspectors, Instructors, Engineers and other related Professionals