ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals

ECN Shout Chat
Top Posters(30 Days)
Admin 17
Recent Posts
Anyone hiring inspectors?
by sparky66wv. 03/26/17 12:22 PM
Old decora style outlets
by Admin. 03/25/17 11:40 AM
ESA Arc flash course
by TheShockDoctors. 03/24/17 10:15 AM
fuse rejectors
by HotLine1. 03/24/17 07:53 AM
Another Forum Update
by Admin. 03/22/17 03:04 PM
New in the Gallery:
SE cable question
Popular Topics(Views)
231,509 Are you busy
166,213 Re: Forum
160,660 Need opinion
Who's Online Now
1 registered members (sparky66wv), 62 guests, and 12 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate This Thread
Page 1 of 2 1 2
#159881 - 03/02/05 03:28 PM Stripping 24ga wire  
Haligan  Offline
Member
Joined: Feb 2004
Posts: 111
Berkeley, CA USA
I have the little Klein telcomm scissors. They have the two notches along the spine of the blade. The notches look just the right size for 24ga wire and maybe 22ga. Problem is that when I try to use them, all I get are little colored shavings.

Is it my technique or is there a better tool for this?


Study Guides for VDV / Structured Cabling Installers

Voice, Data, Video, (VDV) Fiber Optics, Communications, Low Voltage,
Fire Alarm, Electronic Security Systems Installations & Related

NTC Low Voltage Training & NICET Exam Study Guides
Low Voltage Training & NICET Exam Study Guides


#159882 - 03/02/05 04:26 PM Re: Stripping 24ga wire  
hbiss  Offline
Member
Joined: Dec 2003
Posts: 886
Hawthorne, NY USA
I have never found those stripping notches to be of any use.

You don't need strippers for this anyway. Just grab the end of the wire with your needlenose pliers and the insulation will come right off. Make believe the pliers are a stripper and pull.

This is actually the recommended method since there is no chance that you will nick the copper. Incidentally, when you wrap the wire around a screw or binding post it is important not to wrap more than 360 deg. In other words, the wire should never cross over upon itself. Reason for this is when you tighten the screw or nut on a wire that crosses over itself a notch will be created where they cross. This will cause the wire to be weakened and will break off with only slight movement.

-Hal


#159883 - 03/03/05 01:23 AM Re: Stripping 24ga wire  
Haligan  Offline
Member
Joined: Feb 2004
Posts: 111
Berkeley, CA USA
SO EASY!

Thanks.

Good point about the multiple wraps.


#159884 - 03/03/05 02:57 PM Re: Stripping 24ga wire  
gfretwell  Offline


Member
Joined: Jul 2004
Posts: 9,057
Estero,Fl,usa
If you watch a phone guy you will see them strip this wire in the "V" of partially opened blades of the shears. You don't jam it in, just let it grab the insulation and pull. There is a bit of a "touch" in doing this.


Greg Fretwell

#159885 - 03/03/05 03:34 PM Re: Stripping 24ga wire  
mkoloj  Offline
Member
Joined: Jan 2005
Posts: 135
NNJ\NYC
I have always used the notches on the scissors and had them work perfectly fine without any broken conductors due to nicking the copper, I have seen people trying to use the notched and doing nothing but cutting the wire shorter and shorter so I guess it is definitely something that you have to get a feel for. I lay the conductor in the corresponding notch either 22 or 24 ga like Haligan said and put my finger on the other side of the conductor and pull, you have tyo have the flat side of the scissors pointing towards the direction you are applying pressure to strip the wire.


#159886 - 03/03/05 05:37 PM Re: Stripping 24ga wire  
hbiss  Offline
Member
Joined: Dec 2003
Posts: 886
Hawthorne, NY USA
Actually I think the notches in some scissors are better than others. I have seen some that are so heavily plated that I never even bothered to try them.

I like needlenose the best. You have them out and in your hand anyway to wrap the wire.

-Hal


#159887 - 03/04/05 05:31 PM Re: Stripping 24ga wire  
pauluk  Offline
Member
Joined: Aug 2001
Posts: 7,520
Norfolk, England
I've often used the partially opened blade trick as well, although it's probably a good idea to practice on scrap first if you're not used to the technique!

I have a pair of scissors with the notches as well, although I've only ever tried using them a time or two and always reverted to my usual methods (blades or strippers).

Using less than a 360-degree wrap was always recommended on the type of screw terminals we had on the old GPO telephone blocks here. It would insure a good secure connection without the risk of cutting through the conductor.


#159888 - 03/10/05 05:28 PM Re: Stripping 24ga wire  
Sandro  Offline
Member
Joined: Dec 2001
Posts: 444
Stoney Creek, ON, Canada
I tried the needlenose method. Maybe I need more practice. Results weren't satisfactory. I will stick to my regular method....side-cutters used as strippers(I think some of you guys call them 'dikes'). After some practice, it is rare occasion the copper gets nicked.


#159889 - 03/12/05 12:18 PM Re: Stripping 24ga wire  
dryden_burton  Offline
Member
Joined: Nov 2004
Posts: 11
Maple Creek, Saskatchewan, Can...
I use my teeth works perfect for all small wires


Dryden

#159890 - 03/12/05 12:37 PM Re: Stripping 24ga wire  
mkoloj  Offline
Member
Joined: Jan 2005
Posts: 135
NNJ\NYC
I hope you have good dental insurance there dryden_burton.

[This message has been edited by mkoloj (edited 03-12-2005).]


Page 1 of 2 1 2

Member Spotlight
HappyElectrician
HappyElectrician
Penn USA
Posts: 31
Joined: December 2011
Show All Member Profiles 
Featured:

2017 NEC and Related
2017 NEC
Now Available!

Shout Box
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.016s Queries: 15 (0.003s) Memory: 0.8188 MB (Peak: 0.9952 MB) Zlib enabled. Server Time: 2017-03-26 17:06:56 UTC