The Electrical Contractor Network

ECN Electrical Forum
Discussion Forums for Electricians, Inspectors and Related Professionals

Books, Tools and Test Equipment for Electrical and Construction Trades

Page 1 of 2 1 2 >
Topic Options
Rate This Topic
#152753 - 12/20/05 02:48 PM Avalon Theatre - Part 4 *****
Webmaster Offline

Administrator
Member

Registered: 10/07/00
Posts: 3142
Loc: NY, USA
 Quote:
Hello all:

Attached are some photos from a theatre I service here in So. Calif. Virtually all of the gear is original and dates back to the 1930's when the building was erected.

hope you all enjoy!

- mxslick







Top
Super Rod Cable Installation Tools

Super Rod Cable Rod System
Super Rod Cable Rod System -
Voted
Best Product of the Last 50 Years by members of NICEIC

#152754 - 12/20/05 04:17 PM Re: Avalon Theatre - Part 4
sandsnow Offline
Member

Registered: 09/21/04
Posts: 163
Loc: Irvine, CA, USA
I've heard of the Avalon, but never been. Don't they have some rock shows there?? Maybe I'm thinking of something else.

Simply fantastic the stuff is in such good condition!!!!!

Kudos to the owner for high quality maintenance!!!!!
_________________________
Larry LeVoir
Inspector
City of Irvine, CA

Top
#152755 - 12/20/05 07:24 PM Re: Avalon Theatre - Part 4
mxslick Offline
Member

Registered: 10/24/04
Posts: 785
Loc: Atomic City, ID USA
Indeed, this is all in great condition considering it's age.

More on what you're seeing:

#24: Rear view of Brenkert Enarc lamphouse showing the knobs to adjust arc length, reflector position and the rehostat on the left controls the motor which feeds the carbons automatically. The handle is the DC switch for that arc.

#25: Old school meets new school! Foreground is a full shot of the #1 Brenkert projector and Carbon Arc lamp. This machine holds 2,000' film reels (about 20 mins. running time) in the round magazines you see at top and bottom. The projectionist would run alternate reels on the two Brenkerts and "change-over" between reels. The magazines were required in the days of the highly flammable nitrate film. You can see, on the wall to the right of the projector, one of the steel fire shutters which drops over the ports in the event of a fire. A linkage (big iron pipe really) runs the length of the front wall, with it held from rotating down by a fusible link stretched over both Brenkert machines. The end of the pipe and linkage can be seen behind the grey exhaust hose on the top left. There is also a rope by the door which the operator can release to drop the shutters as he leaves. (The only safe course of action in a nitrate fire!) This booth is one of the few left that can safely run nitrate film. The black unit with "Xetron" on it is a modern, 2,000 watt Xenon arc console. In that large box is a very heavy electromagnetic rectifier rig (Think welder on steroids); an automation unit to control the projector, lights(not used here) and sound functions; the actual lamphouse itself with the bulb mounted horizontally inside a deep-dish parabolic metal reflector with forced-air cooling. The projector mounted to it (not visible)is a Century SA with R3 soundhead, and a red LED optical sound pickup. Film is fed from a "platter" transport by guide rollers, it is spliced together (made-up) by the projectionist. Pretty typical of what you have at most modern multiplex theatres.

#26: This is an operator's eye view of one of the Brenkert projectors. The paint job's pretty thrashed, but the machine itself purrs like a very contented kitten (it's twice as quiet as the Century they run every day.) The horizontal machine at the bottom is the RCA 9030 Soundhead, which has the drive motor for the whole machine and the sound pickup parts. It and it's sister on the other Brenkert use the old-style white exciter lamp and solar cell pickup for the sound. As a historical note, it was only after sound became big in cinema that this Projector head/soundhead installation became common. Prior to that, most projector heads were mounted directly to a pedestal base and were cranked by HAND!

#27: Here's and extremely rare item, a Brenkert Dual effects projector. Using color wheels (visible on the bottom right); metal cutouts of clouds, angels, etc. and other neat items, one could project a variety of effects onto the screen or curtain. There were also large slides (I think about 5x8 inches) that you'd mount in the holder to let the crowd know it's intermission, etc. Sadly, this is missing some key parts, but we have struck the carbon arcs and they still work. Behind it you can also see one of the two carbon arc spotlights mounted on a pole. It's mate is on the opposite side of the booth, next to the switchboard.

The theatre still uses the Brenkerts a few times each year, for a big silent film festival. The newer Century/xenon combo runs the daily shows for the island populace and tourists.

I hope you've enjoyed the toru, there is really a lot more to see, but I don't want to drive Bill crazy

"The circle is now complete." - Darth Vader
_________________________
Stupid should be painful.

Top
#152756 - 12/20/05 08:03 PM Re: Avalon Theatre - Part 4
Bill Addiss Offline
Member

Registered: 10/07/00
Posts: 4196
Loc: NY, USA
 Quote:
I don't want to drive Bill crazy
Tony,

Not at all, these are great!!

BTW, I've been in touch with a relative of Frank Adam off and on over the last year and a half. She recently sent me some papers to scan and post on ECN. I'll try and get to that soon as I get my scanner working again.

Bill

[This message has been edited by Bill Addiss (edited 12-20-2005).]

Top
#152757 - 12/24/05 06:32 AM Re: Avalon Theatre - Part 4
iwire Offline
Moderator

Registered: 01/05/03
Posts: 4343
Loc: North Attleboro, MA USA
Tony the photos and explanations where great and very interesting.

Thank you for sending them all in.

Bob
_________________________
Bob Badger
Construction & Maintenance Electrician
Massachusetts

Top
#152758 - 12/24/05 12:01 PM Re: Avalon Theatre - Part 4
mxslick Offline
Member

Registered: 10/24/04
Posts: 785
Loc: Atomic City, ID USA
Bob and Bill and everyone else:

You're welcome, I appreciate all the kind comments and questions these pics have generated.

For other than emergency repairs, I visit this location quarterly to check things out and do preventative maintenance on the projectors and lamps. My colleague who is the local Projectionist's Union Rep, is and old-school operator with many years of experience. He spent most of his projectionist career operating machines like the Brenkerts.

On my next visit, I'll try to get into the main service room, the organ motor starters and other points of interest. I'll also get pics of the exhaust fan repairs for your commentary.
_________________________
Stupid should be painful.

Top
#152759 - 11/19/06 12:39 PM Re: Avalon Theatre - Part 4
mxslick Offline
Member

Registered: 10/24/04
Posts: 785
Loc: Atomic City, ID USA
Bumped due to the "Great Xenon Power Supply Caper" thread..
_________________________
Stupid should be painful.

Top
#152760 - 11/19/06 09:35 PM Re: Avalon Theatre - Part 4
techie Offline
Member

Registered: 05/17/05
Posts: 240
Loc: palo alto, ca usa
 Quote:
I've heard of the Avalon, but never been. Don't they have some rock shows there?? Maybe I'm thinking of something else.



That would have been the old Avalon Ballroom in San Francisco, which actually reopened a few years ago, but appears to be dormant again.

Chet Helms and The Family Dog produced shows there in the 60's, including Big Brother and The Holding Company w/Janis Joplin, the Grateful Dead, Buffalo Springfield, Captain Beefheart, Moby Grape, The Doors, etc..

poster art from that era: http://www.wolfgangsvault.com/Catalog.aspx?VenueID=ABR&Page=5

Top
#194111 - 05/10/10 12:59 PM Re: Avalon Theatre - Part 4 [Re: techie]
mxslick Offline
Member

Registered: 10/24/04
Posts: 785
Loc: Atomic City, ID USA
Bumped up to tie in with the "What was this DC generator for?" thread...
_________________________
Stupid should be painful.

Top
#213348 - 04/11/14 10:47 PM Re: Avalon Theatre - Part 4 [Re: Webmaster]
mxslick Offline
Member

Registered: 10/24/04
Posts: 785
Loc: Atomic City, ID USA
Bumped up because it's been over 8 years for this thread..:)
_________________________
Stupid should be painful.

Top
Page 1 of 2 1 2 >



ECN Electrical Forums - sponsored by Electrical Contractor Network - Electrical and Code Related Discussion for Electrical Contractors, Electricians, Inspectors, Instructors, Engineers and other related Professionals