The Electrical Contractor Network

ECN Electrical Forum
Discussion Forums for Electricians, Inspectors and Related Professionals

Books, Tools and Test Equipment for Electrical and Construction Trades

Page 1 of 2 1 2 >
Topic Options
Rate This Topic
#111871 - 03/15/07 06:52 AM violation picture
Rob Offline
Member

Registered: 12/22/03
Posts: 15
Loc: New York

Top
2014 / 2011 NEC & Related Books and Study Guides
#111872 - 03/15/07 07:18 AM Re: violation picture
Tom Offline
Member

Registered: 01/01/01
Posts: 1069
Loc: Shinnston, WV USA
I didn't know that plumbers perforated tape was thick enough to provide the required protection. Learn something new everyday. :rolleyes:
_________________________
Few things are harder to put up with than the annoyance of a good example.

Top
#111873 - 03/15/07 07:44 AM Re: violation picture
Zapped Offline
Member

Registered: 10/01/02
Posts: 481
Loc: Huntington Beach, CA, USA
Never let plumbers touch wire. Also, never let the guy who did this installation touch wire. Infact,don't let anybody related to him touch wire either. In fact...

Top
#111874 - 03/15/07 07:50 AM Re: violation picture
SteveFehr Offline
Member

Registered: 03/19/05
Posts: 1192
Loc: Chesapeake, VA
Well, when the homeowner wants to hang a shelf and his nails keep getting bent, he's just going to reach for a drill anyhow- this saves him the trouble!

Top
#111875 - 03/15/07 03:15 PM Re: violation picture
Lostazhell Offline
Member

Registered: 02/21/04
Posts: 1248
Loc: Bakersfield, CA (Originally Or...
There's more pics... take the 5 off the end and replace with a 1, 2, 3, 4.... Someone doesn't realize that outer sheathing is supposed to enter the box too! :rolleyes:

Top
#111876 - 03/15/07 05:53 PM Re: violation picture
ShockMe77 Offline
Member

Registered: 06/11/05
Posts: 823
Loc: Rahway, New Jersey
Well as long as the sheetrockers have good aim... :rolleyes:

Top
#111877 - 03/15/07 07:10 PM Re: violation picture
Lostazhell Offline
Member

Registered: 02/21/04
Posts: 1248
Loc: Bakersfield, CA (Originally Or...

Top
#111878 - 03/16/07 10:10 AM Re: violation picture
Sixer Offline
Member

Registered: 08/08/05
Posts: 264
Loc: Canada
So do those wires now have a free air rating? \:D
_________________________
Sixer

"Will it be cheaper if I drill the holes for you?"

Top
#111879 - 03/16/07 12:32 PM Re: violation picture
wa2ise Offline
Member

Registered: 11/29/02
Posts: 771
Loc: Oradell NJ USA
 Quote:
Well, when the homeowner wants to hang a shelf and his nails keep getting bent, he's just going to reach for a drill anyhow
Well, homeowners need to understand that when their nails don't penetrate and only get bent, that they are in fact hitting protective metal. That there's wiring or pipes behind it that could get damaged. And that they must give up on that spot, and nail elsewhere. And also not to use very long nails that they might happen to have a supply of... :rolleyes:

Top
#111880 - 03/16/07 05:20 PM Re: violation picture
n1ist Offline
Member

Registered: 02/13/02
Posts: 176
Loc: Malden MA
Of course, being perforated tape, Murphy would make sure the nails went thru the hole and into the romex :-)

Top
Page 1 of 2 1 2 >



ECN Electrical Forums - sponsored by Electrical Contractor Network - Electrical and Code Related Discussion for Electrical Contractors, Electricians, Inspectors, Instructors, Engineers and other related Professionals