ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals

Page 1 of 2 1 2 >
Topic Options
Rate This Topic
#107964 - 06/25/04 02:09 PM Liquor Store Pics
Admin Offline

Administrator
Member
Registered: 10/07/00
Posts: 3417
Loc: NY, USA
Quote:
I saw these coming home the other day. These were taken at a liquor store near my house. The funny part is once inside I noticed they were in the process of installing security cameras...I wonder how that will turn out. Guess I better hurry up and drink my beer so I can take more pictures huh?

Chris C.




Top
2017 / 2014 NEC & Related Books and Study Guides
#107965 - 06/25/04 07:55 PM Re: Liquor Store Pics
Bjarney Offline
Moderator
Registered: 04/10/02
Posts: 2527
Loc: West-Southern Inner-Northeast ...
I’m guessing an engine-block heater and laptop per stall, and it was a rush job for Antarctic –30° due any day now.
Top
#107966 - 06/25/04 08:25 PM Re: Liquor Store Pics
WELLGROUNDED! Offline
Junior Member
Registered: 06/05/04
Posts: 11
I wouldn't thow my beer can in that receptical,(pun intended)sparks may fly.
Top
#107967 - 06/26/04 05:07 PM Re: Liquor Store Pics
John Steinke Offline
Member
Registered: 04/03/01
Posts: 518
Loc: Reno,Nv., USA
Not to go off on a tangent, but...

Anyone have a way of anchoring stuff to those sheet metal panels that they're happy with?
Top
#107968 - 06/26/04 05:22 PM Re: Liquor Store Pics
rhagfo Offline
Member
Registered: 04/16/01
Posts: 43
Loc: Portland, OR. USA
Let's see weather proof covers, Check
Plenty of Support for conduit, Check
Weather proof fittings, Check
If this was in the Mojave desert, it might not have any moisture problems.
Top
#107969 - 06/26/04 09:05 PM Re: Liquor Store Pics
Lostazhell Offline
Member
Registered: 02/21/04
Posts: 1428
Loc: Bakersfield, CA (Originally Or...
John Steinke wrote:

Quote:
Anyone have a way of anchoring stuff to those sheet metal panels that they're happy with?

Yep, Aim for a stud! If not, there's not a whole lot more that self tapping button heads I can imagine...

rhagfo, The Mojave is known for flash floods during certain times of year! Not to mention the occasional high desert freak snow drop...

Im really curious what the purpose for these are... Vending machines maybe? Install by Pepsi's in-house handyman?

-Randy
Top
#107970 - 06/27/04 07:05 AM Re: Liquor Store Pics
Dave55 Offline
Member
Registered: 05/08/04
Posts: 697
Loc: Crystal Lake, Illinois, USA
On sheet metal I'd use two-hole straps with 1/4" bolts with nuts & washers on the back side.

Dave
Top
#107971 - 06/27/04 02:02 PM Re: Liquor Store Pics
electure Offline


Member
Registered: 12/24/00
Posts: 4259
Loc: Fullerton, CA USA
As the smart(dumb)alec that I am, the plugs are upside down...S
Top
#107972 - 06/27/04 02:08 PM Re: Liquor Store Pics
electure Offline


Member
Registered: 12/24/00
Posts: 4259
Loc: Fullerton, CA USA
You use #10-12-14 Fastenes on this stuff. Like Randy said, hit the studs.
Top
#107973 - 06/27/04 02:25 PM Re: Liquor Store Pics
iwire Offline
Moderator
Registered: 01/05/03
Posts: 4391
Loc: North Attleboro, MA USA
I agree with the above, you either hit the structure inside or you have trouble with anything more than the smallest raceways and boxes.

In a pinch I have used toggle bolts on this with a fender washer to cover the hole. A little spray paint that is a close match hides the washer pretty well compared to leaving it shiny zinc.

This is a poor option if you can see it from inside the building though.

If I had to do that job in the picture (with the right boxes) I would probably use at least four #12 fasteners and a full layer of silicone adhesive between the box and the wall.

Bob
_________________________
Bob Badger
Construction & Maintenance Electrician
Massachusetts
Top
Page 1 of 2 1 2 >

Member Spotlight
Member Since: 08/22/05
Posts: 44
New in the Gallery:
SE cable question
Featured:

2017 NEC and Related
2017 NEC
Now Available!

Shout Box


Who's Online
0 registered (), 91 Guests and 10 Spiders online.
Key: Admin, Global Mod, Mod
 
New in the Gallery:
SE cable question
 
Top Posters (30 Days)
Admin 47
HotLine1 43
gfretwell 19
Ruben Rocha 12
Trumpy 9
 
Newest Members
Scotto, Freecrowder, clee512, Jdscott2005, FAIZAN

ECN Electrical Forums - sponsored by Electrical Contractor Network - Electrical and Code Related Discussion for Electrical Contractors, Electricians, Inspectors, Instructors, Engineers and other related Professionals