The Electrical Contractor Network

ECN Electrical Forum
Discussion Forums for Electricians, Inspectors and Related Professionals

Books, Tools and Test Equipment for Electrical and Construction Trades

Topic Options
Rate This Topic
#106758 - 02/10/05 02:24 PM Double Whammy!
Webmaster Offline

Administrator
Member

Registered: 10/07/00
Posts: 3142
Loc: NY, USA
 Quote:
Hello,

I've never submitted one of these before, but here goes...

Aluminum wire on a Cu-Only device, and the wires are poorly attached too.

-Joey (jdadamo)



[This message has been edited by Webmaster (edited 02-10-2005).]

Top
2014 / 2011 NEC & Related Books and Study Guides
#106759 - 02/10/05 02:32 PM Re: Double Whammy!
jdadamo Offline
Member

Registered: 11/10/04
Posts: 37
Loc: Calgary, AB, Canada
should read "aluminum" wire... of course that's probably clear in the photo

Wonder how much load those connections could handle before failing horribly...

[This message has been edited by jdadamo (edited 02-10-2005).]

Top
#106760 - 02/10/05 03:22 PM Re: Double Whammy!
Webmaster Offline

Administrator
Member

Registered: 10/07/00
Posts: 3142
Loc: NY, USA
 Quote:
should read "aluminum" wire
OOPs!! sorry about that, I lost a word in doing the Copy/Paste. I fixed it.

thanks,

Top



ECN Electrical Forums - sponsored by Electrical Contractor Network - Electrical and Code Related Discussion for Electrical Contractors, Electricians, Inspectors, Instructors, Engineers and other related Professionals