The Electrical Contractor Network

ECN Electrical Forum
Discussion Forums for Electricians, Inspectors and Related Professionals

Books, Tools and Test Equipment for Electrical and Construction Trades

Topic Options
Rate This Topic
#104732 - 10/20/03 05:23 AM Rings, KO's, and Splices! All Wrong! Job Fails!!
Joe Tedesco Offline
Member

Registered: 10/07/00
Posts: 3325
Loc: Boston, Massachusetts USA


Rings, KO's, and Splices! All Wrong! Job Fails!!

How would you write the violation notice?
_________________________
Joe Tedesco, NEC Consultant

Top
2017 / 2014 NEC & Related Books and Study Guides
#104733 - 10/25/03 11:53 AM Re: Rings, KO's, and Splices! All Wrong! Job Fails!!
Inspector Grump Offline
Member

Registered: 01/04/03
Posts: 19
Loc: Bloomfield,NJ,USA
On 3 Pages
_________________________
Larry

Top
#104734 - 10/25/03 10:11 PM Re: Rings, KO's, and Splices! All Wrong! Job Fails!!
wireman Offline
Junior Member

Registered: 10/24/03
Posts: 9
Loc: state of washington
It looks like this pathetic attempt at wiring has been in use for quite some time. The thing that comes to mind is whether this installation was ever inspected. I don't know of a licensed electrician who would do such shoddy work, nor, do I know of an inspector who would pass it. That is one ugly mess.

Top
#104735 - 06/05/04 06:54 PM Re: Rings, KO's, and Splices! All Wrong! Job Fails!!
Theelectrikid Offline
Member

Registered: 04/30/04
Posts: 854
Loc: Levittown, PA
I would write this Violation on about 5 pages with a special number on all of the pages of the owner's copy... 911
_________________________
Is there anyone on board who knows how to fly a plane?

Top


ECN Electrical Forums - sponsored by Electrical Contractor Network - Electrical and Code Related Discussion for Electrical Contractors, Electricians, Inspectors, Instructors, Engineers and other related Professionals