0 members (),
376
guests, and
7
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Oct 2000
Posts: 2,749
OP
Member
|
Interesting! Comments?
Joe Tedesco, NEC Consultant
|
|
|
|
Joined: Dec 2000
Posts: 4,294
Member
|
The installer forgot to put a "weathershield" over the 4-S box!
|
|
|
|
Joined: Aug 2001
Posts: 7,520
Member
|
Did the guy who did this live someplace where it's never windy and the rain always falls dead vertical?
|
|
|
|
Joined: Nov 2001
Posts: 745
Member
|
looks to me like that romex needs to have a drip loop where it enters that fixture . This is a very common sight in my part of the country. Unfortunately, as Paul mentioned, it rarely rains vertically here... Mike (mamills)
|
|
|
|
Joined: Aug 2002
Posts: 1,691
Member
|
All I can say is at least he didn't duct tape the fixture itself -- shades of Haymarket....
So how abraded is the NM where it's touching the edge of the tin?
|
|
|
|
Joined: Apr 2001
Posts: 518
Member
|
At the risk of sounding silly, I have done ASTM "rain" tests for two testing organisations, and that piece of sheet metal might actually pass! (tests typically have little or no wind).
|
|
|
|
Joined: Aug 2002
Posts: 1,081
Member
|
What about acid rain?
That 4" box doesn't look so weather proof, either.
|
|
|
|
Joined: Aug 2002
Posts: 1,691
Member
|
Come to think of it...neither does the octagon "handibox" that I bet the guy used for the light fixture either!! Joe do you know if there is one of those octagons with the punch-outs?
|
|
|
|
Joined: Oct 2000
Posts: 2,749
OP
Member
|
No, but I'll bet it is an octagon box with knockouts!
Maybe the bottom one is open?
Joe Tedesco, NEC Consultant
|
|
|
|
Joined: Apr 2001
Posts: 518
Member
|
This suggests the topic: should boxes, etc. protected by overhangs be of the outdoor type? I have learned to make all my stuff outdoors of the "sealed" type; too many times I've had to open boxes that were filled with wasp nests- in one case, even a bird nest!
|
|
|
Posts: 3,682
Joined: October 2000
|
|
|
|