The Electrical Contractor Network

ECN Electrical Forum
Discussion Forums for Electricians, Inspectors and Related Professionals

Books, Tools and Test Equipment for Electrical and Construction Trades

Topic Options
Rate This Topic
#104448 - 02/26/03 03:53 AM Missing Information in Switch
Joe Tedesco Offline
Member

Registered: 10/07/00
Posts: 3325
Loc: Boston, Massachusetts USA
The missing information about this product here is a very serious violation, because the instructions, other important installation information, and listing requirements are gone!

This was a 200 amp fused switch:





[This message has been edited by Joe Tedesco (edited 03-04-2003).]
_________________________
Joe Tedesco, NEC Consultant

Top
2014 / 2011 NEC & Related Books and Study Guides
#104449 - 03/04/03 04:08 AM Re: Missing Information in Switch
Joe Tedesco Offline
Member

Registered: 10/07/00
Posts: 3325
Loc: Boston, Massachusetts USA
I believe that information of this type should be of a more permanent type!

This information should be able to grow as old as this switch, without falling off or becoming unreadable!
_________________________
Joe Tedesco, NEC Consultant

Top
#104450 - 03/04/03 05:23 PM Re: Missing Information in Switch
sparky Offline
Member

Registered: 10/18/00
Posts: 5545
'embossed' nameplates on motors seem to stand the test of time better

Top



ECN Electrical Forums - sponsored by Electrical Contractor Network - Electrical and Code Related Discussion for Electrical Contractors, Electricians, Inspectors, Instructors, Engineers and other related Professionals