The Electrical Contractor Network

ECN Electrical Forum
Discussion Forums for Electricians, Inspectors and Related Professionals

Books, Tools and Test Equipment for Electrical and Construction Trades

Topic Options
Rate This Topic
#104395 - 02/08/03 05:11 AM Bad Splices
Joe Tedesco Offline

Registered: 10/07/00
Posts: 3325
Loc: Boston, Massachusetts USA

Bad Splices ......
Joe Tedesco, NEC Consultant

2014 / 2011 NEC & Related Books and Study Guides
#104396 - 02/08/03 12:12 PM Re: Bad Splices
Elec_VA Offline

Registered: 01/15/03
Posts: 41
Loc: Sterling, VA, USA
At least one of the two is taped, the guy almost got it! This is the kind of stuff that makes the crocodile hunters job look a bit tame at times. 110.12, Anything else?

[This message has been edited by Elec_VA (edited 02-08-2003).]

#104397 - 02/08/03 01:13 PM Re: Bad Splices

Looks like a Neu is tied-out with the line wire (blk).

#104398 - 02/12/03 09:30 PM Re: Bad Splices
frenchelectrican Offline


Registered: 02/06/03
Posts: 938
Loc: Wi/ Paris France { France for ...
ahh excuse moi ;

but can i add one more thing that is the other wire is alumuain ??? my eyes are teasing me. but if that so that is most crazy thing i see it or some one use the soldering tin on wires but i look at it c'est le alumuain wire there . should use specal split bolts or conneters for that type of wires rated for that puropse

merci marc
Pas de problme,il marche n'est-ce pas?"(No problem, it works doesn't it?)


ECN Electrical Forums - sponsored by Electrical Contractor Network - Electrical and Code Related Discussion for Electrical Contractors, Electricians, Inspectors, Instructors, Engineers and other related Professionals