ECN Forum
Posted By: Admin Swedish Lock-out Tag-out - 02/17/03 05:18 AM
[Linked Image]
Quote
This is in the same building as our office. Someone has put a tag on a piece of equipment warning that it shouldn't be used. He or she also put a padlock on the emergency disconnect. There's just one little problem...

(In case you were wondering, "Nödströmbrytare" means emergency disconnect in Swedish.)

C-H
Posted By: frenchelectrican Re: Swedish Lock-out Tag-out - 02/17/03 06:16 AM
i wondering if they put the padlock to keep it on all the time i can see the box with handle with lever up to on postion and lock it on all the time to prevent anyone to turn off the power by mistake i see it some in both usa and france locations

P.S. i belive the code do allow to keep it lock for specal reason i dont rember it is fall under section 200 or 450 ( 96code)

merci marc
Posted By: John Steinke Re: Swedish Lock-out Tag-out - 02/19/03 12:02 AM
Frenchie- I believe that whether you can lock the disconnect in the "on" position depends upon whether there is overcurrent protection at, or next to, the disconnect. I see a lot of such "lock-ons" at service entrances, just before the meters/panels.
Posted By: C-H Re: Swedish Lock-out Tag-out - 02/19/03 07:29 PM
Well, I'm certain this wasn't intended as a lock-in. The trolley hoist (Is that the right word? It's used to lift cargo and move it along a rail) it controls has been hit by trucks repetedly, which has meant that the rail is severly damaged. Someone inspected it a few months ago and decided that it shouldn't be used. When I saw that someone had put a lock on it I thought "Great", but a moment later went [Linked Image] [Linked Image] [Linked Image]
© ECN Electrical Forums