Springfield, Delco PA Panel - 10/29/07 12:42 PM
submitted by HCE727:
![[Linked Image from electrical-photos.com]](https://www.electrical-photos.com/data/506/medium/IMG_1587.JPG)
![[Linked Image from electrical-photos.com]](https://www.electrical-photos.com/data/506/medium/IMG_1589.JPG)
![[Linked Image from electrical-photos.com]](https://www.electrical-photos.com/data/506/medium/IMG_1591.JPG)
![[Linked Image from electrical-photos.com]](https://www.electrical-photos.com/data/506/medium/IMG_1592.JPG)
Re: Springfield, Delco PA Panel - 10/29/07 03:12 PM
Crikey HC,
You are having a good run of neat panels lately.
You are having a good run of neat panels lately.
Re: Springfield, Delco PA Panel - 10/29/07 04:00 PM
Well, I'll at least give them SOME credit for using SER cable to feed the sub panel!
Re: Springfield, Delco PA Panel - 10/29/07 07:07 PM
It's PA, the capital of handymen with licenses.
Ian A.
Ian A.
Re: Springfield, Delco PA Panel - 10/29/07 10:37 PM
Pictures being worth a thousand words...another reason for the Commonwealth to persue a uniform statewide construction code....licenses, permits & inspections.
Re: Springfield, Delco PA Panel - 10/30/07 12:06 AM
Hmm, gotta love that "grounding" in the first picture! A few loops around the NM clamp should do it! 
Ian A.
Ian A.
Re: Springfield, Delco PA Panel - 10/30/07 02:59 AM
Wait a minute!
The sub is fed from the main panel. Then the white NM comes from the sub and goes back into the main?!?
Aren't the electrons going to get dizzy?
Larry C
The sub is fed from the main panel. Then the white NM comes from the sub and goes back into the main?!?
Aren't the electrons going to get dizzy?
Larry C