ECN Forum
Posted By: Joe Tedesco Why is he smiling? - 11/20/04 02:31 PM
[Linked Image]
Posted By: dmattox Re: Why is he smiling? - 11/20/04 03:42 PM
Because he doesnt have to worry about box fill :P
Posted By: Sir Arcsalot Re: Why is he smiling? - 11/20/04 04:09 PM
Obviously, the person who wired this is type "NM"- No Mind!!!!
Posted By: electricman2 Re: Why is he smiling? - 11/20/04 05:06 PM
Finally, a J-box with enough room to work and no cover screws to loose!!!
Posted By: mxslick Re: Why is he smiling? - 11/20/04 06:17 PM
He just tabulated the repair bill for this mess and realized he CAN afford that vacation to the Bahamas!!
Posted By: ComputerWizKid Re: Why is he smiling? - 11/20/04 10:56 PM
I hope that 300 OHM twin lead antenna wire is not being used at a line voltage to connect a receptacle or lights
Posted By: lil suzi Re: Why is he smiling? - 11/22/04 01:26 PM
I was just gonna make the same comment about the j-box, no screws to lose, lots of room. Ha!
Posted By: mamills Re: Why is he smiling? - 11/22/04 03:01 PM
WHAT...NO DUCT TAPE???!!!

That's why he's smiling...Duct tape is harder to remove than electrical tape or masking tape [Linked Image]. Plus...everyone knows that splices in individual wires (free-air style)need little, if any, insulation... [Linked Image]

Mike (mamills)
Posted By: Electricmanscott Re: Why is he smiling? - 11/22/04 09:37 PM
He wants to show off those nice teeth!
Posted By: pwood Re: Why is he smiling? - 11/23/04 12:57 AM
home inspection required wiring to be brought up to code.CHACHING!$$$$ [Linked Image]
© ECN Electrical Forums