ECN Forum
Posted By:
Joe Tedesco
Classic - Nebraska State Electrical Board
-
06/16/02
01:07 AM
Insulated Enclosure!
[This message has been edited by Joe Tedesco (edited 08-19-2002).]
Posted By:
Bill Addiss
Re: Classic - Nebraska State Electrical Board
-
06/16/02
03:15 AM
Joe,
What kind of Panel
board
is this?
Looks like
Pine
Unbelievable!
Bill
Posted By:
sparky66wv
Re: Classic - Nebraska State Electrical Board
-
06/16/02
05:19 AM
This is
not
what I meant when I talked about the old beautiful oak load centers in the Lowe Motor Inn!
Anybody going to Point Pleasant, WV anytime soon?
Posted By:
Bjarney
Re: Classic - Nebraska State Electrical Board
-
06/16/02
05:48 AM
Hey! That was my Cub Scout project fed from a pair of #6 dry cells in 1959. I always wondered what happened to it.
(The burn marks sure aren't mine!!)
Posted By:
pauluk
Re: Classic - Nebraska State Electrical Board
-
06/16/02
08:46 AM
Custom-made busbar assemblies our specialty.....
Posted By:
mamills
Re: Classic - Nebraska State Electrical Board
-
06/16/02
02:46 PM
Great Idea! Those doggone knockouts in steel boxes are too much trouble anyway!
Kinduva unique concept, too...a panel that can use virtually ANY kind of breaker!
Mike (mamills)
Posted By:
arseegee
Re: Classic - Nebraska State Electrical Board
-
06/16/02
03:42 PM
Is the NEMA3R version made from pressure treated stock?
Posted By:
motor-T
Re: Classic - Nebraska State Electrical Board
-
06/16/02
05:54 PM
Please tell me this was for demonstration purposes ONLY. You know like the 'See and Say' books we got for the kids.
-Mark-
Posted By:
AlphaOperator
Re: Classic - Nebraska State Electrical Board
-
07/02/02
10:31 PM
Are those scorch marks on the wood???
Posted By:
SvenNYC
Re: Classic - Nebraska State Electrical Board
-
08/19/02
03:57 PM
those are scorch marks allright....
--
sven
Posted By:
mamills
Re: Classic - Nebraska State Electrical Board
-
08/19/02
05:06 PM
Joe;
Thanks for re-opening this thread. Do you know anything about the history of this curious "panel"?
Mike (mamills)
Posted By:
Joe Tedesco
Re: Classic - Nebraska State Electrical Board
-
08/19/02
07:26 PM
From the Nebraska State Electrical Board:
This was a homemade electrical panel.
The inspector required the property owner to remove it.
The burn marks are from the torch used to solder the wires together at connections.
Posted By:
sparky
Re: Classic - Nebraska State Electrical Board
-
08/20/02
12:15 AM
Quote
The inspector required the property owner to remove it
no doubt there was some initial reaction....
[This message has been edited by sparky (edited 08-19-2002).]
Posted By:
John Steinke
Re: Classic - Nebraska State Electrical Board
-
08/27/02
01:08 AM
At least you don't need to worry about the "enclosure" becoming energized!
©
ECN Electrical Forums