Some time ago, I came to the conclusion that the NEC alone is not enough for the average sparky.


So I started a library, which I occasionally add to. This has been a good resource.

My Q is, what good books, software, periodicals, newsletters, etc should one be collecting.

Any suggestions out there???

Sparky,

Interesting that I happened to be the first to see this ... you're not baiting me are you?

My recommendations are as follows:

There are a number of great magazines thatyou can subscribe to for FREE (no particular order)
CEE News
EC&M
EC Mag
EC&EN
EBMag - (Canadian)


IAEI has an informative monthly mag, but you have to join - reasonable dues $35/yr I think and you get a Free Code Book.

I think the NEC Handbook is great to give you some intentions not always clear.

An "Illustrated Changes Book" describing code changes clearly makes things easier.

I used to have some of the UL Books Green, White and found some interesting info there.

National Electrical Safety Code

Just some suggestions..

Bill

Sparky,

This is a great idea to have a tread like this running, getting multiple replies from different people of the trade. Newcomers that are in need of these books, which are either unsure of how to ask, or shy to ask, will benefit. So will the seasoned Installer.

My input might be somewhat too far off-topic in some places, but who knows?? I have no ideas to any Periodicals / Magazines, only books.

To begin with, anyone that wishes to excel beyond the NEC should check into the local codes for that State, County and/or City. This will help in an understanding of the infamous term: "AHJ"!! Also demonstrates the fact that the NEC is the Minimum requirements and all that jazz...

Moving into theory, a few good books on AC and DC theories - complete with circuit concepts - are a must! These books should only cover the basic stuff, so they are not too overwhelming.

In conjunction with this, some Mathematics refresher books would be next. These to include basic math, Algebra [both areas], Trigonometry, Geometry, Logarithms, plus Differential and Integral Calculus. These topics are needed for not only the advanced theories, but for designing / Engineering and will be a great help for estimations and stuff.

Next would be advanced AC theories, including Transformers, AC Motors and advanced circuit elements plus calcs.

After this, a few good Electrical Systems Designing books would be an excellent choice. At least two that follow the current NEC version, and at least two that go under an Engineers' view [only the very basics here!].

Now for the advanced separate subjects:

1: Transformers design and operations,
2: Motors, Motor controllers,
3: Short Circuit Calcs - Overcurrent Devices,
4: Lighting devices and systems,
5: Power systems interconnections,
6: Solid State / Electronic control devices and theories,
7: PCs and LAN / WANs - setups and equipment,
8: TVSS - Power Quality,
9: Energy Conservation,
10: Power transmission and generation,
11: Communications equipment [Telephones, Radio, TV, etc.],
12: Engineering - Electrical, Mechanical and Civil,
13: Electricity in transportation,
14: Fuzzy Sets and Fuzzy Logic.

To add to these subjects, in future times these related topics are of great benefits:

1: Physics [physical sciences],
2: Life [earth] sciences,
3: A little of Quantum Mechanics [Quantum Theory of fields, Mechanics Introductions, Etc.],
4: Nuclear and Particle Physics,
5: Acoustic [sound] Physics,
6: In-Depth studies of Lightning discharges,
7: Any other relative sciences.


As to the PC / Software side:

1: Fully understanding the way your PC works is a very valuable tool. For me, I would have difficulty not understanding the tool I am using.
This would be the Hardware angle along with the Operating System too.
2: A strong, current spreadsheet program that is easily shared,
3: A nice database program, for quick databases,
4: A good circuit schematic program, or "Flowchart" program - such as Visio,
5: A "Rock Solid", non buggy, easily sharable and definitely POWERFUL program for Computer Assisted Drafting [CAD],
6: A strong Word processor,
7: A scanner, plus digital camera, along with good software for them,
8: A reliable Internet Connection [Hardware, Software and ISP],
9: - The most important - A "Rock Solid" PC, plus operating system to run this stuff on,
10: A laser printer [preferred], or Color Ink-Jet printer [both would be better],
11: A good Plotter [wide format printer], which would be used for CAD drawings,
12: Ergonomic workstation and equipment [mouse, keyboard, chair, lighting and large monitor],
13: All tech books located right there at the workstation at a hand's reach.
14: A really easy, plus powerful estimating program.


With these things in hand, plus participating in on-line forums such as this one, a person can increase their trade knowledge 200 fold in a little as 5 years, just as long as they continue to work in the trade while studying. This way the book stuff makes sense, as there is a real world thing to apply to. This is covered briefly in another thread on this forum.


So, I hope that I covered the areas OK. It's one where I feel confident throwing out ideas to anyone, as it is the stuff I have used personally. Of course my message is a long 'old novel - practically a Mini-Series so I hope it captured some attention from people which hopefully read the complete article.

If anyone needs some specific names or details for any mentioned items above [such as books or software], feel free to post a message in this thread or contact me directly via E-Mail at:

adst@SoCA.com

and I'll be happy to assist.

Sparky: Let me know your feelings on this list.

Bill: Let me know how you feel too. I hope to expand to your previous message's content with this one.
I'll return the answer key for the code quiz to you later on, as I am selling copies of it for $250.00 a pop and
[just a little joke regarding another thread]


Scott. "S.E.T."

All good suggestions here,

As Bill mentioned;
( now that we've got you on the line Bill )
The mag's always have the trade leaders sometimes doing an in depth study of a particular application or code. This really can get one's nose in the book....The IAEI mag is one serious mag, and yes, you get a code book!
The illustrated changes, well hey!, the're illustrated !
The handbook follows suit, the expert commentary is priceless!

Scott, a good PC is very helpful, i'm still workin' up mine. Is there a site for this "Visio"? obviously it would also help if i learn to type with more than two fingers

I suppose we could mention some books out there by name, as this is a plug for them;

-The American Electricians handbook
-Stallcup's Electrical Calculations Simplified

and then , as you mentioned Scott, those books that specialize;
-Soares, good one for grounding...


any more ???


P.S.---Scott..."fuzzy sets & fuzzy logic" ? did someone write a book on me??

[This message has been edited by sparky (edited 02-04-2001).]

[This message has been edited by sparky (edited 02-04-2001).]

Things change, and so does the IAEI. Membership is now $60 a year, and they have done away with the free codebook offer. They offer other items for sale, but not like the good old days. You still get the great magazine, and some of the reference books mentioned here are published by them, such as the "Analysis of the Code", "Soares book on grounding", and others.

I keep a copy of "Ferm's Fast finder" on my desk. It has lots of short cut formulas and a index to the NEC. It is somewhat easier to find everyday items than the NEC's index.

For inspectors, I would suggest getting ahold of old ROP or ROC on the code changes. It takes some work, but a person can find the reasons for a change in the code, or a reason for not changing the code, in these books. Submit a code change and you receive the latest copies free.

For electricians, any reference book is valuable, if it covers an area that interest the electrician. Look for old how to wire books, and read and compare them with the current code.

PS. If anybode has old (Pre-1953) NEC codebooks that they want to get rid off, please e-mail me.

Thanks

Rick Miell <rmiell@hotmail.com>

Rick,

When did they change the Membership fees?
It must have been recent. Do they give "points" towards Books? I just got a Code Book recent months ago, but I had credits from '99 when I forgot to send in the card.

Bill

Any suggestions on an electrical calculations book out there?

Sparky,

As long as you asked, here's a bunch
https://www.electrical-contractor.net/The_Store/Calculations.htm

Sparky,

Fuzzy Logic is an AI Technology [Artificial Intelligence] that was supposed to be more popular than it is now

It uses "Feedback" from the environment around it and builds a Database according to what it sees and what it should do.

It's undergoing extensive testing in Japan for their high speed passenger trains.

It appears to be getting a few applications here in the states. Have you noticed some newer Camera applications on traffic signals [ones that are not "Big Brother"]. These would use Fuzzy Logic Technology for traffic control.
My Brother-in-law works at a firm that is developing [actually has developed] these types of traffic control systems here in So. Calif.
The program learns what constitutes traffic by "watching" the intersections with four [4] separate cameras. As it learns, it will identify a car, truck or pedestrian by enclosing a "pick box" around the subject. All this goes into it's database. from there, it "learns" the types of traffic which it will need to control at that intersection.
Benefits are signal synchronization and traffic controlled per situation, rather than "guesstamation".

It is a really neat technology, one that might soon pick up in the Machine Tool Industry and possibly on Lighting applications.

As far as any Calcs books, I use "Standard Handbook For Electrical Engineers" by Fink and Carrol, published by McGraw - Hill. Also use many theory books [I can list if needed].


Next, check out the ECN bookstore, as you may find exactly what you are looking for. This would be more structured to the EC, as opposed to the EE.

I get a lot of books from an on-line tech bookstore, but there material may be way off topic for what you are looking for.

Lastly, I use the SPD design book from Bussman, plus other older documents. These are available on-line from bussman [the fuse company]. Be sure you have either the Adobe Acrobat reader [cheapest and easiest], or a full version of Acrobat [I have the full version 4.0xx] in order to view these files, as they are .pdf files [Portable Document Format, the common acrobat file].

Also check into epanorama.net, as they offer a lot of tech stuff.

Good luck!

Scott "S.E.T."

Sparky,

Forgot to add a few last things

I do not know if Visio has a demo version that you could download, but it's worth a try! Have no idea of a URL, so best bet would be to type VISIO into your browser's search engine and see what comes up.

Good luck with your PC !! Keep up with it and all the headaches that go along with hardware / software configs! That's when you get some kind-of free lessons

Best if you do not try to work with any machines that are older than the Intel P5 CPU [the original Pentium] and limit it to nothing older than P5 166 [166 MHz]. If you go older, like into the 80486's [AKA 486], you might have trouble getting hardware that fits these busses [ISA] that would be worth using Software also has finiky limits, most have Pentium 166 minimums, but others have basic requirements, that place the minimums at a 486 DX2 [66 MHz] minimum.

If this junk is over your head [looks like a bunch of Techno-Nerd Greek jibberish to me ], please feel free to ignore it all. If not, great!

I'll add some book titles later in a new message in this thread. Give me some hints to what subjects.


Scott "S.E.T."

Bill;
Mike H has some good books, as my interest is in calculations, i purchased his software, it really speeds it up. I may invest in his calculations book, just to offset my Stallcup one

Has anyone seen a good calc book on short-circuit withstanding? , Or anything including this new 2002 "flash protection calc" ?

Scott, if the trades on it's way to techno-nerd city, i'm in.

Sparky

[This message has been edited by sparky (edited 02-09-2001).]

Sparky,

Check out the SPD manual from Bussman for the fault calcs data. I know that you will love this manual, as it has a ton of information in it.

Go to this URL
http://www.bussmann.com/tech/applications.html

and select the SPD manual [Bussman Electrical Protection Handbook].

If that link doesn't take you directly to the page with the SPD handbook, go to their homepage
http://www.bussman.com/

and from the side menu, select "Technical Services", then from the drop down box, select "Software Programs, Applications, Selection Assistants, Educational Data", which will take you to the page containing the handbook.

a few notes on the handbook:

First off, it is a large file, so be ready for a long download!.

Secondly, it contains over 100 pages, so it's best to save it to your hard drive in a temp folder that's easy to find, then view and print it off-line.

Lastly, It's a .pdf file, so you will need the Adobe Acrobat reader in order to view it. If you don't already have this, go to the Adobe web site and download the free reader.
Before you go to get the SPD handbook, configure the Acrobat reader so it does not open the file while you are on-line. Make it have the file saved to disk instead of opening it directly through the plug in.

Have fun!!

Bill,

Hope this information and links are OK with you. If not please let me know and I will not do again in future.

P.S. do you have anything in your bookstore that would cover the area which Sparky needs? [SCA calcs].
I would suggest to Sparky and anyone else, to get no less than two [2] books on this subject, or any tech subject. So do check out ECN's bookstore for any data on SCA calcs.


Scott "S.E.T."

Scott,

No problem here. I've even talked to the Bussman people about including direct links to some of their resources on the site. I just haven't gotten around to doing it. I expect to be doing a lot of renovating in the weeks ahead. It's on my list.

As far as anything else goes, feel free to recommend anything you want here. This forum is really for you guys and to be any good it shouldn't have any restraints when it comes to something like that. There's only 2 rules I'd like to see observed here Keep it light (no flames) and keep it PG. I really want this to be a place where people can help each other and that is more important to me than anything else. Got It?

I myself, was even going to mention some of the books that were mentioned such as the American Electrician's Handbook (did you ever drop that on your foot?, whoa!) but somebody else beat me to it. There is a series of workbooks that I enjoyed going thru also I will get the info on them and post it here. Till then - carry on...

Benfield Bending manual - did anyone mention that?

Bill

That Bussman links a keeper! , thanks Scott, a very good step by step approach to the SCA calc's...

Bill; I wore a hole in my old Bendfield giude some years ago, when i used to carry it around a pipe job.

If i recall, he ( Benfield ) had quite a history.......

one of my favorite books is by mike holt, understanding the national electrical code . to bad in only goes through half of the code book.