ECN Forum
Posted By: ga.sparky56 ECN - 12/21/04 01:50 AM
I've been around here another year,and learned even more from you folks here.

I don't post as much as I used to but I still read and learn a lot.

Thanks to Bill,and all who make this site possible.

For all who celebrate,I wish you a Merry Christmas.

Russell
Posted By: Jim M Re: ECN - 12/21/04 02:42 AM
I'd like to second that.

Thanks to all those that choose to share their knowledge and make this a great site to visit and learn.

May you all have a safe and prosperous New Year.

Jim Milby
Posted By: Sir Arcsalot Re: ECN - 12/21/04 02:53 AM
I also want to take the time to thank Bill and the other great professionals here. This is truly an exemplary website- even though it's habit-forming I'm certainly glad it's not a controlled substance.

May each of you have a very blessed Christmas and an outstanding 2005. Thanks again y'all, and also thank you for putting up with me!

Alex
Posted By: Dave55 Re: ECN - 12/21/04 04:26 AM
Thanks again, Bill. It's made a real difference in my work and business.

Have a wonderful holiday.

Dave
Posted By: Trumpy Re: ECN - 12/21/04 05:01 AM
Just a General all round thanks Guys, for your support of ECN over the last year!.
It's only this support that keeps us going, regardless of the Admin, Moderators, we'd have nothing to do, if it wasn't for you guys.
And also we'd have nothing to read here either, except moaning about why aren't there enough posts here.
There isn't any chance of that happening.
And to Bill and the other Moderators, I wish a very Merry Festive season indeed! [Linked Image]
Posted By: mxslick Re: ECN - 12/21/04 05:28 AM
Bill, Trumpy and everyone here:

I too have found this site to be a great source of information, fun to read and great that differing opinions can be aired without malice.

Bill, Trumpy and Joe, you and the other mods who work so hard deserve a lot of credit, you do a fantastic job, I raise a Holiday toast to you all!!

And Happy Holidays and Happy New Year to all!!
Posted By: Roger Re: ECN - 12/21/04 09:18 PM
I would also like to say thanks and Merry Christmas to all. [Linked Image]

Roger
Posted By: pauluk Re: ECN - 12/21/04 09:29 PM
Merry Christmas one and all, and God bless us everyone.
Posted By: Bill Addiss Re: ECN - 12/23/04 04:13 PM
Ditto to all of the above. We've got a fantastic group here!

Many Thanks to the Moderators and all that take the time to help answer a question or offer some advice. Something like this is a Group effort and the kudos belong to everyone.

Best wishes to ALL!
Bill
Posted By: HotLine1 Re: ECN - 12/23/04 09:15 PM
Mr. Bill, and EVERYONE:

Being politically incorrect "Merry Christmas To ALL"

Being politically correct: "Happy Holidays"

My best wishes to all, if I had to list everyone.....I'd be here for a long time, as I type slowly.

This is a great site, a lot of info, and opinions are shared by one and all, and yes, it is adictive.

My best to Joe Tesdesco, also.

John
Posted By: Joe Tedesco Re: ECN - 12/23/04 09:45 PM
Season's Greetings to all!
Posted By: Wirenuttt Re: ECN - 12/26/04 09:47 PM
It's been a little over two years here and I enjoy reading more than posting. There's a great group here. I wish all of you well.

~Andy
Posted By: Trumpy Re: ECN - 01/02/05 01:43 PM
Hey Bill,
Is there any way of actually getting figures on the number of New Members we have picked up over the last calender year?.
It must be a fair few!. [Linked Image]
And if there is anyone out there that wants to join in, here's your chance.



[This message has been edited by Trumpy (edited 01-04-2005).]
© ECN Electrical Forums