Landis & Gyr Meter Wiring - 04/14/14 04:32 AM
I bought a refurbished L&G Kilowatthour meter, type CL14, to control usage in a tenanted room. Most of the labels are in German.
On the inside cover of the terminal block is a schematic as follows:
[img]https://drive.google.com/file/d/0B41tmRWocSmjckdiUDVZa2tSakU/edit?usp=sharing [/img]
Can I take it that incoming should be at 1(L) and 4(N) and the outgoing at 3(L) and 6(N)?
The actual terminals are as shown below:
[img]https://docs.google.com/file/d/0B41tmRWocSmjaVRiR04tbi1PNDA [/img]
The criss-crossing of the incoming and outgoing cables are unusual compared with other meters (Actaris) I have seen.
Thanks.
On the inside cover of the terminal block is a schematic as follows:
[img]https:/
Can I take it that incoming should be at 1(L) and 4(N) and the outgoing at 3(L) and 6(N)?
The actual terminals are as shown below:
[img]https:/
The criss-crossing of the incoming and outgoing cables are unusual compared with other meters (Actaris) I have seen.
Thanks.