ECN Forum
Posted By: STEVE Residential Panelboards - 05/08/01 01:38 AM
I wanted to drop a line and ask what you guys thought of the SQ. D home line panels.
SQ.D is a good industrial brand, but the homelines I think the nuetral bars are to close to the breakers. It gets a little nerve racking when your working that close to the breaker load side terminals. I still like Murrays design, with the split nuetral.
STEVE
THOMPSON ELECTRIC
Posted By: silverbk Re: Residential Panelboards - 05/08/01 04:05 AM
Quote
Originally posted by STEVE:
I wanted to drop a line and ask what you guys thought of the SQ. D home line panels.

I don't like them they just look cheap to me. I prefer the Murray and GE panels. I have been getting some good deals on GE lately. Plus I know that I always be able to get breakers for them just about anywhere.


SQ.D is a good industrial brand, but the homelines I think the nuetral bars are to close to the breakers. It gets a little nerve racking when your working that close to the breaker load side terminals. I still like Murrays design, with the split nuetral.
STEVE
THOMPSON ELECTRIC
Posted By: sparky Re: Residential Panelboards - 05/08/01 10:23 AM
Homeboy panels! there ok, but i think they were marketed to be competitive, as they are not the quality of the QO line...

[Linked Image]
Posted By: resqcapt19 Re: Residential Panelboards - 05/08/01 12:27 PM
Steve,
I don't think there are any conditions where OSHA will permit you make connections in an energized residential panel.
Don(resqcapt19)
Posted By: sparky66wv Re: Residential Panelboards - 05/08/01 01:08 PM
I like GE too, they improved the "fit " of the beakers do to complaints of them being loose.

I've worked industrial where we had safety gear head to tow and taped everything off with caution tape, never worked hot, etc...it also took all friggin' week to do a "normal" days work.

In residential, OSHA aside, the "woodies" like to have power to their tools, the "muddies" want lights to see by, etc, etc, and the guffaws will fly if you wear as much as a hardhat, (I've tested that one). Heck, just wear gloves around here and you're called a sissy.

I guess there's a "real world" view to all of this, I could just see myself showing up at a jobsite with a hardhat, safety glasses, full body harness, two lanyards, knee pads, shin guards, steel toe boots, leather gloves, tie off some caution tape, set up some orange cones, set up a tall ladder so I don't have to stand on the step with the danger sign, kill the main (or perhaps use a hotstick to kill the Xformer?) and change a light bulb. Yeah, they'd hire me back again... [Linked Image]

OK, so I exaggerate, but do you see my point?


[This message has been edited by sparky66wv (edited 05-08-2001).]
Posted By: sparky66wv Re: Residential Panelboards - 05/08/01 01:10 PM
Woops, meant to edit, but somehow I double posted...

[This message has been edited by sparky66wv (edited 05-08-2001).]
Posted By: sparky Re: Residential Panelboards - 05/08/01 11:29 PM
Virgil;
it's all a game, only it's the powers that be that own the ball & bat!

[Linked Image]
Posted By: golf junkie Re: Residential Panelboards - 05/09/01 01:42 AM
Quote
Originally posted by sparky:
Homeboy panels! there ok, but i think they were marketed to be competitive, as they are not the quality of the QO line...

[Linked Image]

Ditto,

I'm surprised to see so many GE fans here. My experience with GE has not been so good. Broken tabs on the buss, breakers that won't trip with a dead short....the #10 wire fused and the breaker never did trip.

Locally, squareD is most popular, followed by CH, and ITE.

GJ
Posted By: Merritt Re: Residential Panelboards - 05/09/01 02:02 AM
here in miami, theres a supply house for every brand.. it seems like ITE/Seimens is most popular here.. its mostly all we used.. both industrial and res, and also for meter/main combos.. sometimes we have to use a GE meter/main when we need a different size.. from using the 2 i like the ite's better.. better, more well thought out design... the GE's just seem kind of dinky, for the bolt ins, and plug in breakers.. just seems like bad design/poor quality.. i like square d a lot, but we dont see a lot of em here... their commercial panels cant be beat.. at my school (south miami sr. high) they use only square d bolt ins (with FAT handles) and the MDP is a square d frame, but it has a 1600 amp ITE breaker.. weird!

in general though, i like ite.. good availability, selection, quality, design, and fit.. i like it...

-m
Posted By: SlamTex Re: Residential Panelboards - 05/09/01 02:24 AM
A few years ago, I swore by Square D, but I don't think much of the HomeLine load centers. Siemens, Cutler Hammer, and GE all make good load centers. If you are really concerned about the quality, and you have a customer that insists on Square D, step up from a residential grade load center to a commercial grade panelboard, and hit them with the difference in price. All four bands mentioned above make top quality equipment on the commercial grade level. I really don't much care for load centers made by any brand. To me, panelboards are the only way to fly.

HMEL #688
© ECN Electrical Forums