http://www.joetedesco.com/message.ppt

This was an appropriate short and sweet reply, and was the best advice for an unqualified person!

Thanks Electricmanscott!

[This message has been edited by Joe Tedesco (edited 09-08-2002).]

taking it a step further......

Many DIY'ers here have installed thier own service entrance from peak or pole.

The utility wil slap on a 'customer owned' sticker , check the GEC's and fire it up.

There is no 'inspection' per se'....

I'll show up, view obvious time bombs, and be in the position of explaining how wrong or dangerous the installation is.

The common rebuttal being that the poco
( nec challenged) had hooked it up, thus it is ok.

even worse.....the poco rep may have HANDED THE CUSTOMER THE DIAGRAM PICTORAL of the required install, which is simply a picture inclusive of NO nec details...




[This message has been edited by sparky (edited 09-08-2002).]

The bad thing is that the bigger hack job the DIY'er does, the prouder they are of it and take offense if you suggest it has to be completely redone.

Nice special effects!