ECN Forum
Posted By: Bill Addiss Electric Show East - 06/17/02 03:29 PM
Just a reminder to anyone that may be interested;

Electric Show East is going on at the Javits Center in NY city today through Wed. Admission to exhibit area is free to anyone involved in the Electrical Industry. They have over 250 Venders presenting their newest products and services, some offering special discounts on equipment or services.

Wed morning at 9 am there will be a presentation on Code Violations by Joe Tedesco that may include some photos familiar to our group here.

For more info and directions visit:
http://expo.electricshow.com/

maybe I'll see you there!

[Linked Image]
Bill
Posted By: Redsy Re: Electric Show East - 06/18/02 10:47 AM
Bill,
I had every intention of going on Wed., but duty calls.
Hope to see you next year.
Do you ever get down to Philly?
Posted By: Bill Addiss Re: Electric Show East - 06/18/02 02:35 PM
Redsy,

I don't travel all that much, but We go to So. NJ once in awhile and it's right near Philly. The women will go out to the 'Outlet Malls' there (you probably know the ones) and I have always had about 28,000 things I'd rather do than spend a day like that. [Linked Image]

Bill
Posted By: Bill Addiss Re: Electric Show East - 06/19/02 11:05 PM
Just got back from Electric East. Joe T. (Tedesco) gave a nice presentation this morning on code violations with some of his favorite pictures (and ours). Some got quite a reaction from the people there!

Good job Joe!

Bill
Posted By: Joe Tedesco Re: Electric Show East - 06/19/02 11:45 PM
Thanks Bill. I wish I had more time! I could have spent a few more hours on the violations. There were 97 people present and I will probably do this again next year in February in Los Angeles.

Joe
Posted By: Bill Addiss Re: Electric Show East - 06/20/02 03:06 AM
Joe,

Yes, time went by pretty quick. I forgot to thank you (Grrrr ... [Linked Image]) for calling on me in the audience!

If I can make a request, have we seen the leaky LB here yet? If not, could you post it?

Bill

[This message has been edited by Bill Addiss (edited 06-19-2002).]
© ECN Electrical Forums