|
0 members (),
412
guests, and
11
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: May 2001
Posts: 552
OP
Member
|
The exception to 404.9(B) allows for a switch to be ungrounded if it is "provided with a faceplate of nonconducting,noncombustible material. Question is " Shouldn't this requirement also require the same for the faceplate screws" ? Although I see this alot in existing residential installations,very seldom do I see anything other than metal screws.
Donnie
|
|
|
|
Joined: Jan 2003
Posts: 18
Member
|
Many years ago when I was contracting; we always grounded the switches. I feel it makes for a safer job. How many times have you installed a plactic plate and found the home owner changed the plate before final inspection. Now working as an inspector, I have to follow the NEC. I would like to see switched grounded, I know plates are changed and home owners will put on any thing they think looks nice.
Larry
|
|
|
|
Joined: Jan 2003
Posts: 4,391
Moderator
|
Doesn't the exception to grounding the yoke only apply to replacement switches where no grounding means is available.
But in those instances I agree with txsparky nylon screws would be a great idea.
Bob Badger Construction & Maintenance Electrician Massachusetts
|
|
|
|
Joined: Apr 2002
Posts: 7,381 Likes: 7
Member
|
I seem to remember that in a "multi family housing STATE code, you needed non-conductive (nylon) screws) on switchplates. It may have also applied to hotels/motels. There was a thread relating to this a while ago, and I suggested that McMaster Carr still had nylon 6-32 screws in the catalog. John
John
|
|
|
Posts: 4,116
Joined: October 2000
|
|
|
|
|