ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by gfretwell - 03/28/24 12:43 AM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 266 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#150912 01/12/06 04:52 AM
Joined: Dec 2005
Posts: 869
Likes: 4
R
RODALCO Offline OP
Member
Why do we have 2 different pin configurations for the plug in octal relays 2 pole double throw c/o contacts and what problems have these caused by plugging in and forgotten to check.

We use them a lot in our 33/11 kV substations for alarms and the like.

here in NZ Email relays have 3 - 6 to the coil.
European relays 2 - 7 to the coil.


The product of rotation, excitation and flux produces electricty.
Arc Flash PPE Clothing, LOTO & Insulated Tools
#150913 01/12/06 08:15 AM
Joined: Sep 2001
Posts: 806
N
Member
Strange.

Have never seen an octal relay with anything other than 2+7 for the coil here in the US.

Apparently a holdover from the days of octal vacuum tubes, where 2+7 were (almost always) the heater/filament pins.

#150914 02/16/06 09:31 PM
Joined: Jul 2002
Posts: 8,443
Likes: 3
Member
Posted for RODALCO:

Quote
Today had something different from the usuall utility jobs.

I had to liven up the mining transformers for the Puhoi tunnel on SH 1 North of Orewa.

do voltage and rotation, polarity checks etc.

Also fit data loggers because of possible voltage dips.

Northern gate way alliance are drilling through one of the hills to ease our northern traffic flow.

11 kV supply to 3 x SDF fuse switches.

750 kVA 11000 -- 240 / 415 Volts
500 kVA 11000 -- 240 / 415 Volts
600 kVA 11000 -- 433 Volts ( 250 P - N )
1000 kVA 11000 -- 1050 Volts for drilling machine

Had to do the SD switching as well as operating all the mining switchgear.

got some piccies if you are interested.

Cheers

Raymond RODALCO

The Email octal relay. We have these in 24Vdc, 110Vdc and ac and 240Vac with these pin configurations:

[Linked Image]

Substation drawing from substation alarms:

[Linked Image]


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5