ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
UL 508A SPACING
by ale348 - 03/29/24 01:09 AM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (ale348), 302 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#213559 06/02/14 12:23 PM
Joined: Jan 2005
Posts: 65
P
petey_c Offline OP
Member
Anyone have a good idea on how to better twist SEU neutrals? With the upper end (for a mast service) I've always formed the end into a "Z" shape and cranked it tight. With the meter pan end, that's not usually possible. I guess I'm getting more "energy efficient" in my old age. Pete

Joined: Jun 2004
Posts: 1,273
T
Member
Try sticking them (the neutral weave) all into a big blue wire nut.

Fan the two hots to the left and right.

Then wind the neutral with your cordless drill and a nut driver tip.

http://www.licensedelectrician.com/Store/RT/Nut-Blaster.htm

The big blue wire nut grabs the stranded wires sweetly, the drill provides the revolutions. The wire nut is backed off/ clipped off before the neutral is landed the usual way.

The drill motor should be pulsed -- for torque and control.

With practice, you should be able to perfectly create a stranded conductor in the field.

This gambit saves on the wrists, too.

(Omitting the big blue wire nut means trying to stuff all of the strands into your chuck. Good luck with that.)

Last edited by Tesla; 06/02/14 03:26 PM.

Tesla
Joined: Jul 2004
Posts: 9,923
Likes: 32
G
Member
If you zip tie them together first, it is easier to stuff them right into the chuck. Just "milk" them down from the insulation end to get them aligned a little better before you twist them up.


Greg Fretwell
Joined: Jan 2005
Posts: 65
P
petey_c Offline OP
Member
Thanks, I'll give that a try on my next service change.

Joined: Apr 2002
Posts: 7,381
Likes: 7
Member
And for all those years I used to twist them by hand!!

One of the "ol' timers" gave me lessons. I don't know if I remember the steps now.



John
Joined: Jun 2004
Posts: 1,273
T
Member
John...

You'll be shocked as to how quick and pretty a drill motor can twist up the strands.



Tesla
Joined: Apr 2002
Posts: 7,381
Likes: 7
Member
I put my tools away almost 9 years ago!



John
Joined: Jan 2005
Posts: 65
P
petey_c Offline OP
Member
Thanks for those tips. The drill works great. Makes my work look almost professional!


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5