1 members (Scott35),
462
guests, and
8
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Feb 2007
Posts: 1
OP
Junior Member
|
I have just bought a USA produced dvd/tv for my son which has the 2 pin USA mains plug. The manual for the tv reads " Insert the AC plug (with the two blades) into a AC outlet having 110-220v, 50/60Hz. Does this mean that it can be plugged directly into a UK mains point using an adapter or do i need a 240v to 110v power converter. Any help would be grateful.
|
|
|
|
Joined: Sep 2001
Posts: 806
Member
|
Yes, if the device specifies dual voltage operation, you should be fine in that regard. However, the television broadcast standards are different between the US and the UK, so you probably won't be able to watch any off-air TV programming. And unless the DVD player supports multiple standards (and multiple region codes), you can't play UK DVDs either. BTW, I highly doubt your unit was US-manufactured. We haven't had a consumer electronics industry here since the late '70s. [This message has been edited by NJwirenut (edited 02-13-2007).]
|
|
|
|
Joined: Mar 2005
Posts: 1,213
Member
|
Yes, that's correct. As is NJwirenut's observation that your NTSC TV won't work with PAL broadcasts If you plan on using a region-free DVD player or tuner that can convert the signal, you can use it though. Nearly every electronic appliance I've bought in recent memory has been compatible with both US and European power. I've tested it, too- my laptop, pda, cell phone and digital camera all worked fine with just a $1 plug adapter.
|
|
|
|
Joined: Dec 2001
Posts: 2,498
Member
|
My NTSC Super Nintendo worked with a PAL TV, but only in black&white. So when I had the chance I grabbed a PAL/NTSC TV at a flea market.
|
|
|
|
Joined: Aug 2001
Posts: 7,520
Member
|
Quite a lot of U.K.-market TVs these days will display a 525/60-NTSC signal connected via S-video or composite (CVBS), and some VHS VCRs also allow for playback of NTSC tapes.
|
|
|
|
Joined: May 2003
Posts: 2,876
Member
|
As for voltage just give it a check... Sometimes there will be a switch that MUST be moved to the appropriate position, or you may see 120/220 on the unit data plate - BUT STILL LOOK FOR A SWITCH !
Mark Heller "Well - I oughta....." -Jackie Gleason
|
|
|
|
Joined: Jul 2004
Posts: 625
Member
|
Generally, if it has a power-factor correction circuit, that circuit also takes care of "wide-mount" input from about 100-240 nominal. The PFC circuit pumps the input up to 380 volt reservoir capacitor, from which the rest of the power supply operates. I'm waiting for someone to make a super-wide-mount power supply, 12-250 volts, DC to 440 Hz.
|
|
|
Posts: 7,381
Joined: April 2002
|
|
|
|