ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
UL 508A SPACING
by ale348 - 03/29/24 01:09 AM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (ale348), 302 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: May 2002
Posts: 23
A
AC Offline OP
Member
I have a very big, heavy, electric soldering iron that is used mainly to solder sheet metal. It connects to 110V with a two wire cord but has no switch or regulator. It is either plugged in or it isn't.

Adding some kind of switch would not be a big deal, but I would like some kind of device that would allow me to regulate the heat. Does anyone know if that is possible and what kind of device would be used?

Thanks,
AC


AC
Joined: Jan 2002
Posts: 59
C
Member
There is a stand which holds the iron while not in use and has an adjustable thermostat
so that you can maintain whatever heat you desire. Any industrial supply house should have these.

Creighton

Joined: Sep 2001
Posts: 806
N
Member
An ordinary incandescent dimmer should work fine, as a soldering iron is a resistive load. Maybe build a device something like this one:
https://www.electrical-contractor.net/ubb/Forum5/HTML/000551.html

, but I would suggest a proper enclosure, not a plastic outlet box.

I use a variac to control my big iron, but I already had one on my workbench for other things.

[This message has been edited by NJwirenut (edited 06-11-2004).]

Joined: Aug 2001
Posts: 7,520
P
Member
It doesn't give us much fine adjustment as a variac, but one trick I've used in the past is to make up a stand/switch box with the hot line run through a suitable diode.

A switch in parallel with that diode then allows you to run the iron on full power when using it continuously and reduce the power when it is being used only occasionally.

Joined: Sep 2001
Posts: 806
N
Member
Rigging up a microswitch on the stand to insert the diode when the iron is idling in the holder will greatly prolong the life of the copper tip, by preventing the tinning from burning up.

Joined: Apr 2002
Posts: 2,527
B
Moderator
Depending on iron wattage, a pendant-style "corded" lamp dimmer may do, although they are not very rugged in a shop setting.

Lutron and Leviton should make 'em. SwillMart had Leviton 200-watt dimmers for ~$9.
www.lutron.com/LampDimmers/default.asp

Joined: Dec 2003
Posts: 524
Member
... If you're doing light soldering,..ie;..electronics,and such, Weller has a self-regulating,thermostatic soldering station for under $150.00...I used to use this type.. http://www.bertech.com/product2/soldering_stations.htm
Russ

[This message has been edited by Attic Rat (edited 06-13-2004).]


.."if it ain't fixed,don't break it...call a Licensed Electrician"
Joined: May 2002
Posts: 23
A
AC Offline OP
Member
I don't know anything about diodes. I'll try the incandencent dimmer thing. This is my third attempt to reply. Hope it goes though.


AC

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5