ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 260 guests, and 19 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#17871 12/03/02 06:39 PM
Joined: Oct 2002
Posts: 49
J
Member
Does anyone here know much about PLC's and the time involved in learning how to program them. I am pretty proficient in Q-Basic, is it close to that type of programming. New job requires basic knowledge of PLC appliances. HELP!!!


The lesson is in the struggle, not the victory.
#17872 12/03/02 06:47 PM
Joined: Aug 2002
Posts: 42
G
Member

#17873 12/04/02 10:05 AM
Joined: Jul 2001
Posts: 599
J
JBD Offline
Member
Most PLCs are programmed using ladder logic. The primary knowledge base for PLCs is motor control circuits, typical logic relay connections, and timer circuits.

Actual computer languages (like Q-Basic or Visual Basic) and networking skills are specialty skills. The actual programming keystrokes for any PLC are relatively easy to learn.

Definetly checkout the above link to the Learning Pit.

#17874 12/04/02 08:00 PM
Joined: Apr 2002
Posts: 2,527
B
Moderator
Don't overloof... www.mrplc.com www.plcs.net

There are scads of 'em--google it. Manufacturers often have in-house instruction.

#17875 12/05/02 02:10 AM
Joined: Jul 2002
Posts: 8,443
Likes: 3
Member
Pretty much, if you want a career in Industrial Wiring or Controls, these days you have to have a good grounding in PLC
Programming(Ladder logic, Statement programming,C++), the list goes on, just depends on what systems you use regularly, as not all systems use Ladder Logic, I have been on I don't know how many PLC traning courses, provided by the vendors of PLC's,
very helpful, these courses, even have hands-on experiments, to let you use the gear.
Get on to your Automation Rep!, these things do exist, you know. [Linked Image]

#17876 12/06/02 01:06 AM
Joined: Dec 2000
Posts: 45
D
Member
Like everything else it can take a long time to learn PLC's but you'll never learn unless you start. You'l find them easier than you thought at first and extremely complex the more you learn. I get into some programs where a good programmer completely looses me. I've had several courses(AB, Modicon, Gould) and still feel stupid when I have to troubleshoot in front of someone. I start thumbing through the book to remember what every little bit does!

As long as you keep it simple and avoid some of the complex programming, then I think PLC's are easy. It took me about 6 weeks from a good course to learn the basics. And about 5 years of troubleshooting to feel comfortable with them. I hope someday every electrical device uses one. The benefits are endless and so is the job security!

[This message has been edited by DUGMAZE (edited 12-06-2002).]


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5