|
1 members (Scott35),
474
guests, and
11
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Oct 2002
Posts: 830
OP
Member
|
Anyone know the official company name of the "Union" cut in light boxes that have the metal "ears" at the back of the box that pull up to the sheet rock? I have found the site for "Allied Moulded Products" that has one identical but there's not any suppliers real close to my area who carries them as far as I know. The boxes that Lowes and Home Depot sells just don't get it with me. When mounting a bathroom wall mount fixture the flange sticks out from the edge of the fixture and the last one I done, I had to trim off the top, bottom, and sides to hide it from protruding out from the canopy of the fixture. Also cutting them in is not as easy as the ones using just the toggle at the back of the box. I can just use a 3 5/8 hole saw and the box goes right in. What type do you all use?? Thanks.. Steve
|
|
|
|
Joined: Sep 2002
Posts: 943 Likes: 2
Member
|
The big box store cut-in boxes are Carlon* & A POS IMHO,Allied Moulded is my choice just use a 3 5/8" holesaw & your done, not sure if the Union/Sylvania/Challenger boxes are still around, but T&B may have bought them......
*The "Romex" brand boxes seem to be Carlon clones or re branded for Southwire.
|
|
|
|
Joined: Jun 2002
Posts: 44
Member
|
I did find the Allied round push-in boxes on Amazon. One of the sites that has the boxes for sale is Ace Hardware. You might try your local Ace Hardware or a search on Amazon for Allied Molded Fiberglass Old Work Outlet Box (H9338=ESK)
|
|
|
|
Joined: Nov 2007
Posts: 764
Member
|
Union is Thomas & Betts. I believe the 3-1/2" round boxes with the metal ears are their #3080-9. I generally don't like phenolic boxes, but I've used these quite a bit over the years and find they actually work very well for some installations. T&B Boxes
|
|
|
Posts: 70
Joined: January 2002
|
|
|
|
|