1 members (Scott35),
475
guests, and
11
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Nov 2000
Posts: 2,236 Likes: 1
OP
Member
|
Jimmy is confident that he passed his test today. So now it's time for me to figure out this "teaching" thing, being efficient, without much confusion, and trying not to pour too much info at once...
So, any advice at all? It's all on-the-job training here, after the initial license test. No classes available 'cept for Sally Struthers on TV...
I plan to get a 2002 NEC Handbook ASAP and a new UGLY's (2002 out yet?). Any other books recommended?
Thanks for any and all help and advice given.
-Virgil Residential/Commercial Inspector 5 Star Inspections Member IAEI
|
|
|
|
Joined: Oct 2000
Posts: 5,392
Member
|
i would favor the initial [/i]structure[/i] of the NEC, i.e.-first 3 chaps, etc, and work on the terminology as you progress, pepper it with some theory.... of course show & tell always goes a long way..... coincidentally my bro & i are breaking in a new 'recruit'lately, he did well at drill 101 today
|
|
|
|
Joined: Sep 2002
Posts: 37
Member
|
I remember my first day at my first elec job. I asked the boss what was the diference between the brass screw and the silver screw on a rec. he told me and handed me a stack of 40 service calls. the job was at a university. I am a big fan of hands on now, but backing it with theory make things ALOT easier.
|
|
|
|
Joined: Aug 2002
Posts: 112
Member
|
66.....teach him that his screwdrivers are NOT current-rated, and they last longer if he'll shut the power off first. also, to give his wires a little tug after he terminates, to see if they'll stay where he puts 'em.
|
|
|
|
Joined: Sep 2002
Posts: 83
Member
|
Virgil, To keep the flames to a minimum, I'll stay out of this one. Give my congrats to Jimmy!
|
|
|
|
Joined: Oct 2000
Posts: 5,392
Member
|
It's hard to think back when we started, what was impressionable,etc....i guess this is an opportunity to do so...
|
|
|
|
Joined: Jan 2001
Posts: 1,044
Member
|
Virgil,
Get Jimmy a copy of "Electrical Wiring Residential" by Ray C. Mullin. It is expensive ($45 to $50) but is well written, plenty of excellent graphics. Mullin also wrote an industrial book too, I think. If it is as good as the residential book, probably worth a try.
After he's been at it awhile, get him his own copy of "Soares Book on Grounding."
I've always told my students that if they can make good connections and get the grounding right, they've gone a long way toward making a safe installation.
Wish him the best of luck from me.
Tom
Few things are harder to put up with than the annoyance of a good example.
|
|
|
|
Joined: Oct 2000
Posts: 2,723 Likes: 1
Broom Pusher and Member
|
Wish I had something to add, but I might think of something later on, then post it.
I'll stay off the eelektrikal injunear stuff!
Scott s.e.t.
Scott " 35 " Thompson Just Say NO To Green Eggs And Ham!
|
|
|
Posts: 356
Joined: August 2006
|
|
|
|