ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Do we need grounding?
by gfretwell - 04/06/24 08:32 PM
UL 508A SPACING
by tortuga - 03/30/24 07:39 PM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 345 guests, and 27 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#82437 11/14/02 11:41 AM
Joined: Oct 2000
Posts: 2,749
Member
sent by gary brauner

Comments: what is your "interpretation of 230-6?

Would you approve a c.t. can inside a room with the disconnecting mean and the meter 8 feet inside on a wall adjoining the main body of the house!

I believe the conductors are to be outside the structure or encased in 2" of concrete or brick.

My supervisor believes the article 230-6 is superceded by 230-3, and 230-70 as the disconnect id immediately inside or close to the point of entry (his terms)

Do you have an opinion?
gary brauner
hibrau@hgea.org
Location: Maui Hi


Joe Tedesco, NEC Consultant
Stay up to Code with the Latest NEC:


>> 2023 NEC & Related Reference & Exam Prep
2023 NEC & Related Reference & Study Guides

Pass Your Exam the FIRST TIME with the Latest NEC & Exam Prep

>> 2020 NEC & Related Reference & Study Guides
 

#82438 11/19/02 07:13 PM
Joined: Jun 2002
Posts: 186
M
mj Offline
Member
the distance is left up to th ahj. we use a 5 ft max

#82439 11/19/02 08:31 PM
Joined: Apr 2002
Posts: 7,381
Likes: 7
Member
In the areas of NJ that I am familiar with:
18"; 12", "as close as possible"; 3'; and "none". ie: into the back of the panel or main disc at the point of entry.
It is a decision by the local AHJ; it's best to get that "decision" prior to the install if you are not familiar with the locale.
The other alternative is concrete/brick encasement of 2" on all sides.

Being "around for a while" fortunately I know most of the areas, until a "fill-in" inspector shows up.

Your interpertation is the same as I look at it.
John

[This message has been edited by HotLine1 (edited 11-19-2002).]


John
#82440 12/13/02 10:55 AM
Joined: Dec 2001
Posts: 201
A
Member
When you say "c.t.' are you referring to current transformer? I do not do resi. Why would they put a ct cabinet in a house? Over 400a?

#82441 12/14/02 12:49 AM
Joined: Feb 2002
Posts: 2,233
H
Member
Joe,

I agree with John, I have seen a lot of different distances on the inside of the house where the main service is located. The AHJ will have the final word on it. If I was inspecting the job, I would want it as close as possible, as safe as possible or encased in concrete. I have seen where a cable would drop from the ceiling down 4 feet, but it was all above 6 foot high so that you couldn't reach the service cable. I have also made guys install pipe in concrete when they ran a service inside the building because the pipe was subject to physical damage. It is a hard call to make. Get the AHJ out there before you do the job, and I think everyone will be happier.

Harold


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5