ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by gfretwell - 03/28/24 12:43 AM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 260 guests, and 19 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#76628 03/04/01 10:31 AM
Joined: Mar 2001
Posts: 2
T
Tmrosen Offline OP
Junior Member
I have just recently purchased a new home and noticed that the attic has the electrical wires run all across the attic joists. It is not following a path or stapled at all. Some of it is run over my Duct work, etc. Is this standard Code or acceptable?

Thanks

Stay up to Code with the Latest NEC:


>> 2023 NEC & Related Reference & Exam Prep
2023 NEC & Related Reference & Study Guides

Pass Your Exam the FIRST TIME with the Latest NEC & Exam Prep

>> 2020 NEC & Related Reference & Study Guides
 

#76629 03/04/01 12:37 PM
Joined: Nov 2000
Posts: 2,236
Likes: 1
Member
Surface mounted Non-metallic Cable should follow closely to the surface on which it is laid. Code requires staples (or other fasteners) every 54 inches and within 12 inches of a metal box and 8 inches of a plastic one. The cable should either be run through bored holes or protected by furring strips within 6 feet of the access to the attic.

As far as running adjacent or perpendicular to ductwork, as long as the cable doesn't penetrate the duct, then there shouldn't be a problem with code.


-Virgil
Residential/Commercial Inspector
5 Star Inspections
Member IAEI
#76630 03/04/01 05:29 PM
Joined: Jan 2001
Posts: 1,044
Tom Offline
Member
As far as securing the cable every 4 1/2 feet, some jurisdictions do not rigidly enforce this in attics feeling that it is better to allow the cable to move when the insulation is jammed in from below or the cable is kicked by someone crawling in the attic.

Your loose cable is a violation, but I personally wouldn't lose sleep aver it. I'd be more concerned about the quality of all splices & connections.

You might want to do something about the cable over the ducts, I have heard of cases where the vibration, slight as it is, wears through the jacket & insulation.

Tom


Few things are harder to put up with than the annoyance of a good example.
#76631 03/04/01 08:05 PM
Joined: Mar 2001
Posts: 2
T
Tmrosen Offline OP
Junior Member
Thanks for the quick responses however most of the Wire is stapled to the studs but when it gets to the attic it's just all over the place and also pretty tight. It seems as if I were running the wire, it may take more but it would be stapled and not just laying on my ceiling joists.

#76632 03/04/01 08:45 PM
Joined: Oct 2000
Posts: 4,116
Likes: 4
Member
Tm,

I have also heard concerns like those Tom mentioned. I would tend to think that staples in this area are not necessarily a good thing. I don't really see having them stapled every 4 1/2 ft as being an advantage. I do think that they should be routed out of the way of any future storage space where possible.

Bill


Bill

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5