ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Safety at heights?
by gfretwell - 04/23/24 03:03 PM
Old low volt E10 sockets - supplier or alternative
by gfretwell - 04/21/24 11:20 AM
Do we need grounding?
by gfretwell - 04/06/24 08:32 PM
UL 508A SPACING
by tortuga - 03/30/24 07:39 PM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 235 guests, and 27 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 3 1 2 3
#71471 11/03/06 06:21 PM
Joined: Jul 2002
Posts: 680
W
Member
Since when don't they use Mercury in Fluorescent tubes?? They reduced it but its still there

#71472 11/03/06 06:29 PM
Joined: Dec 2004
Posts: 1,064
D
Member
Waste Management here will not pick up my customers trash if fluro bulbs are in there.

We have to collect the bad ones, but haven't found where to get rid of them yet.

#71473 11/03/06 06:48 PM
Joined: Sep 2003
Posts: 650
W
Member
Dnk,

Just how many lamps are you guys dealing with.

Google for fluorescent tube recycling and you will find lots of companies who deal with small numbers of lamps, but they all cost...almost more than the new lamps.

But they seem to have bulk containers that are more economical. I've never needed to use bulk services.

-Jon

[This message has been edited by winnie (edited 11-03-2006).]

#71474 11/03/06 07:01 PM
Joined: Dec 2004
Posts: 1,064
D
Member
about a hundred or so.

Thanks jon, didn't think of that.

#71475 11/03/06 07:11 PM
Joined: Jul 2002
Posts: 680
W
Member
Its illegal to throw them in the trash in Maine. They are known as Universal waste. It costs me 11 cent a foot to get rid of them, 75 cents for metal halide, HP sodium etc

#71476 11/03/06 07:34 PM
Joined: Jul 2002
Posts: 8,443
Likes: 3
Member
walrus,
New tri-phosphor (sp??) tubes do not require mercury to enable the arc to light the phosphor layer.
Newer T8 and T5 tubes do not use mercury.

#71477 11/03/06 07:43 PM
Joined: Jul 2002
Posts: 680
W
Member
As far as Philips is concerned their T8s are low mercury not mercury free http://www.prismaecat.lighting.philips.com/LightSite/Whirlwind.aspx?eca=LNPPLA&cpf=USNPUS&stg=ACT&lan=US+&ecu=LMP|PLC|NP&cnt_key=F_T8PSL%20+|PLC&t=1&tree=0&scr_md=1111&nav=Null&loc =us_en&leftnav=1_1

#71478 11/03/06 11:03 PM
Joined: Jul 2004
Posts: 787
L
Member
Dnkldorf

http://www.bethlehemapparatus.com/

Somewhat local recycler. They offer cartons so you can ship bulbs to them.

Larry C

#71479 11/04/06 09:32 AM
Joined: Dec 2004
Posts: 1,064
D
Member
Thanks Larry,

#71480 11/04/06 11:31 AM
Joined: Apr 2006
Posts: 233
K
Member
Scott

I can see where you are comming from with the PD. I would have thought that by holding the tube before conecting a supply both you and the tube are part of an unbroken circuit therefore no PD would exist. ahhh just thought that would be true untill you let go


der Großvater
Page 2 of 3 1 2 3

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5