0 members (),
231
guests, and
11
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Mar 2001
Posts: 2,056
OP
Member
|
I have been in situations where a run of plastic plumbing (PEX Tubing) has been very close (1-2") to where I'd like to install a recessed light. I'm not sure how close they can be, or what would happen if they eventually came in contact.
A PEX information site says that it is good for up tp 200 deg. for heating applications, 180 deg. for plumbing, but maximum recommended of 140 deg. I'm not sure how hot the outside surface of a Hi-Hat gets.
Any thougths, or experiences would be appreciated.
|
|
|
|
Joined: Jul 2002
Posts: 717
Member
|
Well, if it gets too hot and burns the pex thru at least there will be enough water around to cool things off somewhat.
|
|
|
|
Joined: Feb 2005
Posts: 361
Member
|
I just had an inspector "suggest" I keep my HH's 3-6" away from the pex.
A more prudent solution would be for the plumbers to check the prints and keep their pex away from my HH's.
~~ CELTIC ~~ ...-= NJ =-...
|
|
|
|
Joined: Dec 2004
Posts: 1,064
Member
|
Celtic, I once built 40 identical homes, identical I say..
In every home, the framing was different, the plumbing routes were different, the Hvac returns and ducts were different....
One would think after 0ne or two, people would have their stuff together, and they would all be the same....wishful thinking on my part....
I don't know, cause I got out of that line of work, but pre-manufactured homes seem the only way to avoid these dilemas. I am thinking pre-manufactured meaning, the ones that have all the walls built with cutouts, and then get assembled on site, but I am sure they have their problems too...
Dnk...
|
|
|
|
Joined: Nov 2004
Posts: 138
Member
|
Yeah..I had the same problem with that. I talked to the plummer and he took care of me.
|
|
|
|
Joined: Feb 2005
Posts: 693
Member
|
As long as the pipe contains water, it will never exceed 212F.
I can't imagine a fixture getting near that with the thermal cutout.
Larry Fine Fine Electric Co. fineelectricco.com
|
|
|
|
Joined: Jul 2004
Posts: 9,931 Likes: 34
Member
|
The operative term here is "contain". If it gets to 212f it won't be containing much of anything anymore. The weakest place in that pipe system will rupture. Hopefully it will be the popoff valve in the water heater.
Greg Fretwell
|
|
|
|
Joined: Mar 2001
Posts: 2,056
OP
Member
|
Thanks guys. I kept the light about 4" horizontally. I don't think there's much of a problem, but I looked at the print on the tubing. It said 180 deg. F @ 100 PSI.
|
|
|
|
Joined: Jan 2002
Posts: 1,457
Member
|
What about getting the amnufacturers name and sending them an email. Sometimes they actualy answer questions. Sometimes.
|
|
|
|
Joined: Feb 2005
Posts: 693
Member
|
"They mostly come out at night . . . mostly." ~ Newt in Aliens
Larry Fine Fine Electric Co. fineelectricco.com
|
|
|
Posts: 421
Joined: September 2005
|
|
|
|