ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 260 guests, and 19 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#58069 10/28/05 01:58 PM
Joined: Nov 2000
Posts: 246
R
rmiell Offline OP
Member
From an e-mail I received:

"I am a New Orleans resident. Following hurricane Katrine, the levee near my home broke. My home (built in 1987)is a two-story, wood frame, vinyl siding. The flood water stood in my home at a depth of about six feet for about ten days. It covered all of the switches and outlets on the first
floor, and the circuit breaker box.

I'm sure that the switches and outlets will have to be replaced, as well as the circuit breaker box. Will the wiring be OK?"

Any thoughts?

I referred him to a previous post which had the link to NEMA's paper.

Rick Miell

#58070 10/28/05 02:34 PM
Joined: Aug 2001
Posts: 335
S
Member
Sprayed by rain is one thing, but under water is another. By now the paper within the cable (AC or NM) is saturated and the deterioration has already begun. My opinion ... it needs to go away.

#58071 10/28/05 03:12 PM
Joined: Jun 2004
Posts: 1,273
T
Member
The mold problem demands that everything comes off. Expect to strip down to the framing and dry it out. With wet weather comming, that may be quite a wait. (Tenting, heated blown air?)

All affected electrical is virtually guaranteed to be ruined. Consider jacking the struture up on stilts. This is widely done in Florida. I expect that the government/insurers are going to insist on it in many areas.

More than likely the house is a total loss. It is cheaper to just scrape it down and start over. New construction is so much cheaper per foot than massive repairs.


Tesla
#58072 10/28/05 07:01 PM
Joined: Jan 2003
Posts: 1,429
L
LK Offline
Member
As they say, when you are ordered out of an area for possible flooding, don't forget to leave a cake in the oven.

#58073 10/28/05 08:30 PM
Joined: May 2003
Posts: 2,876
E
e57 Offline
Member
A buddy of mine went back down to clear out his apt., and brought his EC brother-in-law. Said anytime he mentioned what he did for a living people would beg to get him to come by and work. From what I hear, Hotels and Commercial are paying top-dollar, as well as some of the higher-end neighborhoods. The lower end are just getting bull-dozed....


Mark Heller
"Well - I oughta....." -Jackie Gleason
#58074 10/28/05 10:01 PM
Joined: Jan 2004
Posts: 615
J
Member
I would tell him you need to know what type of wiring it is. I imagine thwn in some sort of conduit might be okay. although the conduit may need replacing. I guess PVC with thwn... hhmmm the more I think about it, pretty unlikely it's any good.

#58075 10/29/05 02:58 PM
Joined: Mar 2005
Posts: 1,803
Member
Would the water be wholly or partly sea-water? If so, it will never dry properly as the salts will deliquesce moisture from the atmosphere. I fear most timber structures will be scrap, in that case.

Alan


Wood work but can't!
#58076 10/30/05 05:00 PM
Joined: Jun 2003
Posts: 1,143
D
Member
Along the line Alan suggested, many areas had chemicals & sewage in the water - it wasn't even so "simple" as sea water.

It's a mess, that's for sure.

#58077 10/30/05 06:07 PM
Joined: Sep 2005
Posts: 33
N
Member
i looked at the nema papers and it seems all the wire under the flood waters would need to be replaced. along with plugs and switches,panels and breakers.


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5