ECN Forum Forums General Topics of the Trade General Discussion Area practical sizing of pvc

Bob,
thanks for the support

Don, I appologize for not giving a code reference.

I agree with Bob that this pull does not need a tugger, but if you are short on people and can communicate with the other end be it hand signs, radios, yelling etc... it will make things easier.

Roger

One thing I've learned at this board is trust & respect for all the knowledge that flows through the 1000's of pages on here.. While I tend to take advice from anyone with a grain of salt just as a CYA step.. I haven't been steered wrong here yet. If someone did post misinformation on a subject, people here aren't shy about counter-answering in a professional, friendly manner.

The other thing I've learned at ECN is if you seen the word "Moderator" under a screen name, IMO, the advice is sound Bill has chosen his generals well

-Randy

Randy


I agree 100% with all of that. Speaking for myself I try hard to post accurate information but I still may goof up sometimes, all of us need to be suspect of internet advice.

I also believe one of the best things about Bill's site is the fact people will correct each other without slamming each other.

The code is complicated and mistakes are costly.

Bob.

BTW Thanks.