ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by gfretwell - 03/28/24 12:43 AM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (CoolWill), 250 guests, and 13 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
Joined: May 2002
Posts: 23
A
AC Offline OP
Member
Does anyone have any favorite tricks for installing outlet and switch boxes in walls destined to be covered in two layers of sheet rock?

AC


AC
Joined: Jan 2003
Posts: 4,391
I
Moderator
We use 4" sq box with a plaster ring.

2 layers of 5/8" sheet rock need a 1 1/4" raised ring


Bob Badger
Construction & Maintenance Electrician
Massachusetts
Joined: Aug 2003
Posts: 173
S
Member
Wood framing or metal? RX or BX/MC?

Nail on boxes can be a pain as the nail bosses can get in the way of the first layer of rock.
We do alot of log homes. In interiors we find a problem even with 3/4" T&G wood where the carpenters have to notch the back side of the boards because of the boxes.

1900 boxes with plaster rings is a no brainer.


Speedy Petey

"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
Joined: Oct 2000
Posts: 4,116
Likes: 4
Member
AC,

I consider these boxes to be one of the best new products I've seen recently. I'd recommend them for any place where you're not sure what the final wall thickness will end up too. They're great for Kitchens and Bathrooms that might get a backsplash, or Tile, or whatever, very easy to adjust.

[Linked Image]

[Linked Image]

made by Carlon
[Linked Image] [Linked Image]
Bill


Bill
Joined: Oct 2000
Posts: 5,392
S
Member
kudos on the carlon's Bill [Linked Image]

i carry arlington extenders, for those last minute tile jobs, or similar 11th hr depth changes...
[Linked Image from aifittings.com]

Joined: Dec 2000
Posts: 4,294
Member
As an addenda to Sparky's post, the Arlington extensions as pictured are, to my knowledge, the only ones that are currently UL approved.
They are made by other companies, but don't have the UL.
Bill, very neat box!!...S

Joined: Oct 2000
Posts: 4,116
Likes: 4
Member
I love these boxes, and Blue is my favorite color. They seem pretty sturdy too.

Here's a 2 gang notice the clamp inside that could be used for larger gauge cables.

[Linked Image]

[This message has been edited by Bill Addiss (edited 11-03-2003).]


Bill
Joined: Dec 2001
Posts: 444
S
Member
I don't have any problem using 1-1/2 inch 6/32 screws on back splashes and such.

Joined: Oct 2000
Posts: 4,116
Likes: 4
Member
Quote
I don't have any problem using 1-1/2 inch 6/32 screws on back splashes and such.
Sandro,

Having boxes set back that far in the wall isn't against your Canadian Electrical Code?

Bill


Bill
Joined: Oct 2003
Posts: 259
J
Member
I use the adjustables Bill posted in every kitchen and bathroom. The only bad part is they only come in 1 and 2 gang.

Page 1 of 3 1 2 3

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5