0 members (),
228
guests, and
10
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jan 2005
Posts: 354
OP
Member
|
Anyone ever seen an IEC 60320 C13 outlet built as a wall receptacle, preferably for USA box and plate standards? Listed even better.
|
|
|
|
Joined: Jul 2007
Posts: 1,335
Member
|
Just out of carosity, what are you trying to power? Plug configurations are to prevent applying the wrong voltage, improper ampere, and in this case, possibly the wrong frequency. By installing a receptacle of a certain configuration invites any type of equipment with that plug configuration be plugged into it. Even in an supervised environment. If you are installing a piece of European equipment that will work on the North American power grid, can't you just install the appropriate plug and recept configuration?
"Live Awesome!" - Kevin Carosa
|
|
|
|
Joined: Jan 2005
Posts: 354
OP
Member
|
Devices with C14 plugs are supposed to be able to handle 100-240 volts AC, 50 or 60 Hz. That's probably not the case for shavers and the like, but they have a different plug.
I also want the shroud configuration. I suppose Schuko might also work. Anyone ever seen those fitting American boxes? Or would I need to get the European box setup?
|
|
|
|
Joined: Jul 2004
Posts: 9,931 Likes: 34
Member
|
We had C13 panel mount receptacles in a lot of our machines. They are not a horrible fit in a L-15-R cover with the round hole but it is not listed to be used that way.
Greg Fretwell
|
|
|
|
Joined: Jan 2005
Posts: 354
OP
Member
|
I was figuring that if they were made for wall mounting, they would more likely be made to fit in a decora style plate, rather than the traditional ones. E.g. a single device with one, two, or maybe even three, C13 outlets, in the decora dimensions.
|
|
|
|
Joined: Jul 2004
Posts: 9,931 Likes: 34
Member
|
The problem with C13 is you are not sure what voltage will be there.
Greg Fretwell
|
|
|
|
Joined: Jul 2004
Posts: 787
Member
|
Just like the dual T slot.
|
|
|
|
Joined: Mar 2007
Posts: 404
Member
|
Isn't nearly all equipment with an IEC C13 connector auto-ranging or equipped with a voltage switch?
What's the application, data center? I've seen a lot of power strips in rack-mount units that have IEC C13/15/19 outlets.
|
|
|
|
Joined: Jul 2004
Posts: 9,931 Likes: 34
Member
|
There are plenty of machines out there with switch selected or single voltage supplies
Greg Fretwell
|
|
|
Posts: 32
Joined: June 2004
|
|
|
|