ECN Electrical Forum
Discussion Forums for Electricians, Inspectors and Related Professionals

Alot of out ocf work sparkys are turning to house wiring to get buy

Your bid is high. Thats like a $4000 job and will probably get bid at <$3600 including the service, builder supplies the fixtures & bulbs.

36 man hrs, & less than $2k materials.

Its cut throat around here, seriously $1.70 sq ft bids are common.

Ya gotta be kidding ?? 1.70 USD per sqfoot just for basic set up ?? if that the case I will just bolted from that low price.

Unforetally it not only affect in USA but Europe as well we do feel the effect as well.

The last resdentail house I done in USA it ran 3.12 USD per sq foot { 90% of my time I never use the sq foot price at all }

Merci, Marc

does that include the service?

Includes an underground service.

I don't us a sq ft price either besides something to check my estimate against.

I don't bid on any new constructions homes because of these prices. We'll I do bid on some but I rarely get them.

36 hours is not alot of time to do a neat job.

Here is a little gee whiz info from a friend in a big national builder. This is a typical 2000 sq/ft house in SW Fla.

http://gfretwell.com/electrical/A%20typical%202000%20house%20in%20SW%20Florida.xls

I cant by a fan/light for 22 dollars let alone install it.

Greg:
Just a question...is that an AFCI job?

I imagine this has to be an AFCI job since we are on the 2008. A am not sure about the fan deal. The builder may be buying the fan.