|
0 members (),
205
guests, and
28
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jul 2001
Posts: 311
OP
Member
|
When applying the NEC, is a municipal firehouse considered a dwelling unit. It appears as if it is, according to the definition of dwelling unit given in article 100.
Frank
|
|
|
|
Joined: Jan 2001
Posts: 1,044
Member
|
It looks like the firehouse meets the NEC definition to me, too. You might want to look into the Life Safety Code since this is also a mixed occupancy. The NEC requirements for dwellings might only apply to the areas that involve sleeping, cooking, bathrooms.
Few things are harder to put up with than the annoyance of a good example.
|
|
|
|
Joined: Jul 2007
Posts: 1,335
Member
|
A firehouse IMO is multiple occupancy. Typically in a situation is when you have a conflict in the rules, typically the more sticter prevails. The Life Safety codes are only applicable if it is adopted like the electrical code ot a building code. At a minimum though they can shed light on the matter pending what you are trying to address. You may want to contact the AHJ if you have codes overlapping.
"Live Awesome!" - Kevin Carosa
|
|
|
|
Joined: Jan 2005
Posts: 5,445 Likes: 3
Cat Servant Member
|
Out this way, a firehouse is often a light steel garage, a 'manufactured home,' and a covered passage between the two. In that design, it's pretty simple to separate the structure into different occupancies.
|
|
|
|
Joined: Jul 2001
Posts: 311
OP
Member
|
Our building code department indicated it was a class "B" occupancy; but didn't expand on it. Also, when calculating the service size for a new "mixed occcupancy" building what does the design professional use, the residental standard calculation or commercial calculation?
Frank
|
|
|
|
Joined: Jul 2007
Posts: 1,335
Member
|
Typically they use comercial calculations, for example 180VA per recept, 100%DF on lighting loads, etc.
"Live Awesome!" - Kevin Carosa
|
|
|
Posts: 44
Joined: July 2013
|
|
|
|
|