ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (CoolWill), 23 guests, and 16 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#168827 09/17/07 07:37 AM
Joined: Jul 2002
Posts: 8,443
Likes: 3
Trumpy Offline OP
Member
My Aiwa stereo threw a wobbly last week and with it being 7 years out of warranty, I decided to have a go at repairing it myself.
That was until I turned it around on my workbench to find some very strange looking screws holding the rear cover on.
I've got a very large collection of screwdrivers and bits for tamper-proof screws, but this was a new one on me.
It seems that every time I need to loosen a tamper-proof screw, I end up buying a new bit or screwdriver.
Unfortunately, these screws in the back of the stereo were the sort that only screw in, you can't get them out again, there is no "reverse" part to the screw slot.
Anyway, Mr Dremel won that argument and I found a dry joint where the power transformer secondary feeds into the main board, it just struck me as strange that it took 8 years to fail.
Anyhow, has anyone else ever had a similar experience with these annoying screws?.

Joined: Jan 2005
Posts: 109
L
Member
I use the same tool as you, "Mr Dremal" is my friend. They do make a tool that is the negetive of the screw head for removing them but like you I have too many bits all ready. Rod

Joined: Mar 2004
Posts: 814
B
Member
One trick I heard of that the guys in the joint use, you take a toothbrush handle, heat it up till it's soft, then press it into the tamper proof screw head. Let it cool and now you have the tool to remove the screw.

Joined: Mar 2004
Posts: 193
G
Member
Originally Posted by BigB
One trick I heard of that the guys in the joint use, you take a toothbrush handle, heat it up till it's soft, then press it into the tamper proof screw head. Let it cool and now you have the tool to remove the screw.


Well you learn something new everyday..........huh....


"If common sense was common, everyone would have it"-not sure, someone here

Joined: Nov 2005
Posts: 827
Likes: 1
J
Member
Mike,
I bought one of these a few years ago to take care of most.

http://www.electronix.com/catalog/product_info.php/cPath/435_63/products_id/9288

I'm wondering if the on you dealt with takes this tool.

http://www.electronix.com/catalog/product_info.php/cPath/1_25/products_id/8709
Joe

Joined: Jul 2002
Posts: 8,443
Likes: 3
Trumpy Offline OP
Member
Originally Posted by BigB
you take a toothbrush handle, heat it up till it's soft, then press it into the tamper proof screw head.

Thanks a lot for the tip, BigB!, I'll keep that in mind. wink

Joe,
Yeah, I've got a few of them sets, each having a different selection of bits.
One bit I really find annoying is the smallest "snake-eyes" screw bit, if you happen to turn the driver with too much force trying to initially get the screw to loosen, you can kiss that bit goodbye, I've snapped more of them bits than any other.
Our local automated toilet cubicles down town used them screws prolifically, all though it never stopped all the vandalism that used to occur on the weekends.

Joined: Sep 2002
Posts: 943
Likes: 2
N
Member
Tamper proof????? Tamper resistant is much more accurate IMO.

Joined: Sep 2001
Posts: 806
N
Member
Some of us take tamper-resistant fasteners as a challenge of sorts. Kind of like those "no user-serviceable parts inside" labels...:)

Joined: Sep 2002
Posts: 943
Likes: 2
N
Member
Originally Posted by NJwirenut
Some of us take tamper-resistant fasteners as a challenge of sorts. Kind of like those "no user-serviceable parts inside" labels...:)



LMAO.:D

Joined: Aug 2007
Posts: 61
Member
Yeah, but we do not have to worry about those labels, because we are electricians, not users - Right??


~Matt


I would rather beg for forgiveness then beg for permission.
Page 1 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5