ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Safety at heights?
by gfretwell - 04/23/24 03:03 PM
Old low volt E10 sockets - supplier or alternative
by gfretwell - 04/21/24 11:20 AM
Do we need grounding?
by gfretwell - 04/06/24 08:32 PM
UL 508A SPACING
by tortuga - 03/30/24 07:39 PM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 516 guests, and 17 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Joined: Mar 2005
Posts: 1,213
S
Member
drip frown The stiffened tubing weeped just a *tiny* bit every time I jostled it to change out a hard drive or add another stick of ram, but I never saw it. Every time I'd inspect for leaks, I'd never find one because it was only leaking under special circumstances. Every time I thought I had it fixed, I hadn't. So, it dripped... right onto my $200 video card, destroying it. And the card I'd just replaced. And the crap old card from my old computer- finally, down to my last junk video card- I discovered the REAL problem. Was time to get a new computer anyhow *sigh*

Stay up to Code with the Latest NEC:


>> 2023 NEC & Related Reference & Exam Prep
2023 NEC & Related Reference & Study Guides

Pass Your Exam the FIRST TIME with the Latest NEC & Exam Prep

>> 2020 NEC & Related Reference & Study Guides
 

SteveFehr #173946 01/23/08 01:46 PM
Joined: Jul 2004
Posts: 9,931
Likes: 34
G
Member
I can't seem to keep a fan in my wifes PC (3 bad ones so far) and it has over temped dozens of times with no apparent damage. It just locks up and shuts down the CPU. It took a while for me to figure out what was happening since she just unplugs it and plugs it back in at the first hint of any problem. That seems to kick the fan off again.


Greg Fretwell
Page 2 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5