ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Safety at heights?
by gfretwell - 04/23/24 03:03 PM
Old low volt E10 sockets - supplier or alternative
by gfretwell - 04/21/24 11:20 AM
Do we need grounding?
by gfretwell - 04/06/24 08:32 PM
UL 508A SPACING
by tortuga - 03/30/24 07:39 PM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 524 guests, and 23 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
#152201 10/29/06 12:59 AM
Joined: Jan 2005
Posts: 59
D
Member
yaktx thanx for the info....so and ungrounded tandem blade plug was made before 1930 eh?

#152202 10/30/06 06:04 AM
Joined: Aug 2001
Posts: 7,520
P
Member
Quote
Frequencies weren't fully standardized, either. Although 60Hz AC had become very common in most of North America by 1900 or so, many urban centers already had DC service and would continue to have it until well into the '30s. And most of Southern California had 50Hz AC service until the late '30s.

Britain had a similar variety of frequencies in the early days, finally standardizing on 50Hz with the construction of the National Grid.

D.C. supplies (3-wire, 200/400 to 250/500V) were still in use here in the older districts of some towns well into the 1950s.

#152203 11/03/06 12:39 AM
Joined: Feb 2003
Posts: 288
Y
Member
Didn't we have someone post on here awhile back about living in a Manhattan apartment in the '50s, that had DC service, and needing an inverter to run his record player?

Must have been a rotary inverter, back then.

Page 2 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5